Question about 1994 Geo Metro

Open Question

Flywheel bolt torque spec on geo metro 3cylinder 1991

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: ignition timing for 1991 Pontiac Firefly or 1991 Chevrolet Sprint or 1991 Geo Metro

for 1991 geo metro 1.0 liter 3 cyl engine the timing is 6 degrees before top dead center. you will need a tachometer because the rpm must be 800 when you set the timing. also you will need to disconnect the vacuum advance to the distributor, and plug the hose to avoid a vacuum leak. (alternate method is to pinch the vacuum advance hose going to the distributor while you are setting the timing) Good Luck!

Posted on Feb 15, 2009

alicantecoli
  • 22095 Answers

SOURCE: I'm looking for the torque settings and pattern

what engine does this vehicle have is it a opel europeon model engine with a cast head and push rods or a OHC engine ,if the first type then 75lbs if the ally engine then 65 mark ,start in the middle and then one each side alternatly working your way outwards

Posted on Dec 11, 2010

heimlich
  • 1978 Answers

SOURCE: I have a 1993 geo metro with a 1.0 L I am looking

Rod bearing end caps 33-37 N-m ( 24-26 ft.lbs )

Crankshaft bearing end caps 50-57 N-m ( 36-41 ft. lbs )

Posted on Jan 16, 2011

onebadsnakeb
  • 147 Answers

SOURCE: head bolt torque specs for

54 ft lbs

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bolt torque setting


which bolt>? there are hundreds.
the FSM covers all this.
so does alldata.com
log in and read it.
or look here.
http://geometroforum.com/site/

or
http://geometro.org/index.php

the real deals....

Aug 30, 2014 | 1997 Geo Metro

1 Answer

I need the torque specs for the flywheel 91 geo Metro 1.0


Again
Flywheel bolts
1994 and older.................................................................45

May 07, 2014 | Cars & Trucks

1 Answer

Torquing the head on 1.3 geo metro


1995 Geo Metro 1.3L TBI SOHC 4cyl

The Head Bolt Torque

54 Foot pounds (Final torque)Torque sequence ------------ ' 8 4 2 5 9 ' ' 10 6 1 3 7 ' ------------Final torque must be reached in 3 equal stepsRecheck final torque in sequence

Don't know what year hope this helps.

Feb 12, 2013 | Cars & Trucks

1 Answer

Need flywheel specs and pressure plate torque specs for 1991 ford f250 460 motor 4x4


flywheel bolt torque 75-85 ft-lbs and pressure plate 15-20 ft-lbs

Apr 08, 2011 | Ford F-250 Cars & Trucks

1 Answer

97 geo metro spark plug firing order


3cylinder is 132
4 cylinder is 1342
distibutor turns counter clock wise.

May 19, 2009 | 1993 Geo Metro

1 Answer

Can't get old lower control arm off 1994 geo metro. stuck at ball joint.


remove ball stud bolts .then remove suspension arm bracket nut .remove suspension arm bracket bolts. remove rear bracket and suspension arm. torque ball stud nut 44 ft lbs torque suspension arm rear bolts 32 ft lbs.

May 05, 2009 | 1994 Geo Metro

1 Answer

Ignition timing for 1991 Pontiac Firefly or 1991 Chevrolet Sprint or 1991 Geo Metro


for 1991 geo metro 1.0 liter 3 cyl engine the timing is 6 degrees before top dead center. you will need a tachometer because the rpm must be 800 when you set the timing. also you will need to disconnect the vacuum advance to the distributor, and plug the hose to avoid a vacuum leak. (alternate method is to pinch the vacuum advance hose going to the distributor while you are setting the timing) Good Luck!

Oct 28, 2008 | 1991 Geo Metro

1 Answer

1990 Geo Metro


1990 Geo you should be able to push it in, tighten the small bolts by hand, and tighten the large nut by hand. Then put the tire on and lower it to put some weight on it. Lock the brake and torque to spec. 1990 Geo, the big nut needs to be 129 ft lb.

Aug 20, 2008 | 1994 Geo Metro

Not finding what you are looking for?
1994 Geo Metro Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...