Question about 1992 Acura Legend

2 Answers

What is my ABS light comming on and stay's on how can i fix it temporarly?And my Break light comes on and off,what can i do to temporarly fix it?Please help!!!!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

First check your brake fluid level...low brake fluid can and will cause your brake lights to come on...if that's not it..chances are you have a bad speed or wheel sensor(abs sensor)

Posted on Nov 18, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 225 Answers

You can't fix it temporarily because it will come back on as soon as you use the brakes again. Check the reservoir lever and see if its low. If not, its something more involved and most likely will require parts and labor to repair

Posted on Oct 16, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

1 Answer

My break light keeps coming on


You are low on brake fluid, the handbrake is engaged, or the switch on the handbrake needs to be looked at. If it is the ABS light, there is a problem with the ABS system. The brakes will still work fine, you'll just have regular brakes with no ABS.

Feb 20, 2014 | 1995 Eagle Summit

1 Answer

Break light stays on


Your brakes might be freezing shut.but there was a crack in the brake plate in my truck and it was messing with the bracket abs it could also be freezing the abs sensor

Nov 24, 2013 | Cars & Trucks

2 Answers

What does it mean when my ABS light comes on?And what can i do to temporarly fix it?And also my Break like comes off and on,what can i do about that?


There are lots of things that can make those lights come on. Low fluid level in the brake reservoir, brake pad wear, and/or failure of any of the components that make up the brake system.

I'm guessing from your post though that your reservoir level is just low.

There really isn't anything you can do to make the light go off because as soon as you drive the car the problem will come back.

Oct 16, 2013 | 1992 Acura Legend

1 Answer

Abs and traction control dash lites come on and off at various time..sometimes never come on


Your abs and traction control lights should only come on when you start to slide while breaking(ABS), and when your wheels spin in place when excelerating(TC). If those 2 things don't happen, which with some people they never do, you should never see the lights come on. Only when those mechanisms are in use do the lights come on. And they will always flicker as that is what abs and tc are, intermitant surges to break up the constant. ABS does this for obvious reasons...anti lock break, so when you slide, the abs "taps" the breaks in short bursts so they don't lock up. TC "taps" the exclelrator when it slips. Those "taps" are what trigger the lights on your dash, which is why they flicker and don't stay on.

Sep 26, 2012 | Cars & Trucks

2 Answers

What would cause traction active light come on


i have had this problem since about 6 months after i bought my 2001 impala. the problem is in the hubs. the wireing that runs throw them rubs together and eventually shorts the traction and abs. easy solution to fix it though. get into the hubs and wrap the wires. otherwise take the car in and explain the problem to them and exactly what you need done. 9-10 times they won't fix the problem unless you tell them what you want done. it is really simple and going to the dealer should only cost you about 100 to fix.

Oct 07, 2009 | 2001 Chevrolet Impala

2 Answers

Anti-lock brake system and brake system lights goes on


Abs lights staying on probably a broken wire at the wheel hub I just got mine fixed and every time the light comes on it is a broken wire you have to get a shop to put iton an ABS scanner to find the break

Aug 25, 2009 | 2001 Ford Windstar

1 Answer

ABS- Front Brake problem


Hi take the front brake rotors off and then remove the ABS WSS(wheel speed sensor) from the hub bearing clean the rust/corrosion from under the sensor and the hub bearing then apply a small amount of grease reinstall your sensors (carefull not to break the sensor they break easy) reassemble the brakes that should fix your ABS concern

May 03, 2009 | Chevrolet S 10 Cars & Trucks

Not finding what you are looking for?
1992 Acura Legend Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...