Question about 2000 Plymouth Voyager

4 Answers

Ignition key won't turn - 2000 Plymouth Voyager

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 2,899 Answers

The steering wheel was turned when the key was removed. So when you try to turn on the key, turn the wheel one way and the other way to release the pressure on the key. The key should turn ok.
Hope this helps.

Posted on Mar 24, 2015

  • _-__-___-_
    _-__-___-_ Mar 24, 2015

    Oct 16, 2013, im sure its not still stuck for 1.5 years.

  • danoyachtcap
    danoyachtcap Mar 25, 2015

    When I answer an old question, I answer it for current viewers who might learn something from it.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

TRY GRABING THE STEERING WHEEL AND TURNING WHEEL AS YOU TURN KEY ,SOMETIMES THE KEY WILL HAND ON THE LOCK PLATE THAT LOCKS WHEEL AND MOVIN THE STEERING WHEEL AS YOU MOVE KEY MAY HELP

Posted on Oct 16, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 94 Answers

Try turning the steering wheel either way when turning the key. If the steering wheel is locked in place and the key must be turned to unlock it. If there's a lot of pressure on the steering wheel (like if somebody tried to turn it with the engine off and key out) it can be very difficult to turn the key if the steering wheel is locked.

Posted on Oct 16, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 20,706 Answers

Double posted read post 1

Posted on Oct 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition of ford edge will not turn completely off..it is stuck in position 2 in auxillary power


1-
My ignition key will not turn to off. I can remove the key, but it stays in the accessory mode. What's the fix?
My ignition key will not turn to off can remove the key but it stays in...

2.
Ignition key is stuck and does not turn Inspection Service & Cost
Ignition key is stuck and does not turn Inspection Service Cost...

3.
Ignition key won turn

Aug 24, 2016 | 2012 Ford Edge

1 Answer

Ignition wont turn


if you mean the key won`t turn to start the car you may have a worn key and or ignition switch. try another key to see if its the key. also make sure there is not tension on the ignition by way of the steering wheel being turned in the full left or right turn causing tension on the ignition.

Aug 15, 2014 | Cars & Trucks

1 Answer

Key won't turn in the ignition


probably need a new ignition lock or your key is wore. ignition locks arn't too bad to change depending on the vehicle.

Jul 14, 2013 | Cars & Trucks

1 Answer

Toyota rav 4


ignition keylock cylinder broken or could have the wrong ignition key.

May 06, 2013 | 1998 Toyota RAV4

1 Answer

Stuck eldorado key in DTS ignition now car won't start


Make sure your steering wheel isn't locked. Sometimes a key won't turn until you jiggle the wheel while trying to turn the key.

Aug 21, 2012 | 2004 Cadillac DeVille DTS

1 Answer

I put key in ignition and it won't turn. Steering wheel will turn but key won't turn. We have 2 keys and neither will work. What can I do?


If the wrong key was inserted it may have bent a tumbler pin,maybe try some wd-40 or similar and work it with the right key,might drop the tumbler back,,if not the whole ign. cylinder will have to be changed

Jan 26, 2012 | 2007 Cadillac CTS 3.6L

1 Answer

Key won't turn in ignition


If your steering wheel is locked, turn it a bit away from the locked position. Key should turn now.

Otherwise, you may need to replace the ignition or you have a bad copy of a key.

Jan 22, 2012 | 2004 GMC Envoy

1 Answer

1998 Plymouth grand voyager ignition won't turn


I have had this happen on my 98 Voyager. Just have a new key cut. This new key will sometimes cure the problem. The older keys get worn out and won't unlock the ignition. Try this before a much more expensive and time consuming change of the ignition.

Nov 01, 2011 | 1998 Plymouth Voyager

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

Ignition key won t turn. steering wheel locked


the key may be worn badly or the ignition needs to be replaced.

Jul 31, 2009 | 2004 Saturn VUE

Not finding what you are looking for?
2000 Plymouth Voyager Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...