Question about Cars & Trucks

1 Answer

Cutlass v8 305 is been having a chirp noise I made it worst I burn rubber on a turn the noise got worse and sounds like the engine would be running 65 miles per hour..before engine was running nice and normal .....when I put it on park sounds really loud and is annoying please help ?

Posted by on

  • 1 more comment 
  • giio87 Oct 16, 2013

    like i was saying it had chirp sound before when i pealed off the only way to make the noise go away is by greasing the belts but the noise comes back the next day i dont really move it around because is loud and is emberrasing ..should i rebuilt my motor ?

  • giio87 Oct 16, 2013

    Iol I have no idea sorry this happend to me at night I can't even see the odometer it doesn't have a light .......You guys might think it be the carburator that is making the motor run to high how can I fix it myself ? and about the loud chirp noise could I fix the pulley myself ?

  • giio87 Oct 18, 2013

    Took me 3 days to figure this out how dumb am I lol their was no power steering fluid and no brake fluid what so ever the other problem with carburetor the carb was making motor run fast while I had the vehicle on park ..well I took the carburetor lid off and I pulled the choke wire and acceleration wire back after all I turn the egnition on it went back to a normal running engine ..if it makes any sence

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

The small block Chevy engines commonly wear down and break rocker arms. The chirping is caused by a lack of oil between the rocker arm and ball.

Posted on Oct 16, 2013

Testimonial: "I turn on the engine today and it started doing the same noise ...it was from where the fan and the belt goes their was  smoke coming out it smelled like burn rubber .I turn it off and I closely looked the belt on the sides looked like it was peeling away ..if it makes any sence ?"

  • 1 more comment 
  • giio87 Oct 16, 2013

    I turn on the engine today and it started doing the same noise ...it was from where the fan and the belt goes their was  smoke coming out it smelled like burn rubber .I turn it off and I closely looked the belt on the sides looked like it was peeling away ..if it makes any sence ?

  • joseph cayo Oct 16, 2013

    You probably have a belt driven component freezing up. Could be an alternator bearing or water pump bushing going bade. Take the belt off and see if any component turns hard.

  • giio87 Oct 18, 2013

    Took me 3 days to figure this out how dumb am I lol their was no power steering fluid and no brake fluid what so ever the other problem with carburetor the carb was making motor run fast while I had the vehicle on park ..well I took the carburetor lid off and I pulled the choke wire and acceleration wire back after all I turn the egnition on it went back to a normal running engine ..if it makes any sence

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: i have renault megan scenic 05 plate 1.6

Possible dephaser pulley or dephaser solenoid. Pricy

Posted on Jul 08, 2009

  • 17 Answers

SOURCE: 2002 mustang makes rattling sound when accelerating...

Possible bad motor mount(s) --only thumps or rattles when power is going to the wheels.

Posted on Jun 12, 2009

  • 397 Answers

SOURCE: 4000 rpm at 70 miles per hour

You should have another gear "5th" at 70mph your tacho should read about 2500 rpm.
Make sure you don't need to depress something or push the gear stick against a spring to select 5th.
Is there a gear layout on top of the gearstick knob, do you have 5th gear on there?
The highest gear ratio is a little over 1 to 1 so at 70 mph you would expect 3500 rpm, but, it is a little over 1 to 1 so it will be closer to 2500rpm.

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chirping noise when accelerating


If it is a belt noise, sprinkling baby powder on the belt will make the noise go away. Apply liberaly with engine off onto the belt and start the vehicle. The belt may have gotten coolant on it and this will cause the chirp. Also a defective belt tensioner will cause the belt to chirp

Jan 04, 2016 | 2002 Ford Taurus

1 Answer

I have a 2007 Suzuki Vitara. When I turn the key to the on and off position it has 4 loud chirps from under the dash in the passenger compartment. Can anyone help?


tell what works and not, in total, not just what is odd.
car runs drives perfect?
no warning lights dead.
engine, not crank or run.
or just a chirp.

passenger compartment is huge.
where exactly use a rubber hose to ear under dash to find
who (what) is chirping, may be its mouse hiding there from the cold.
not looking , means, endless speculations here.
get the car serviced? as them , with live help and rubber hose to the ready?

Feb 26, 2015 | Suzuki Cars & Trucks

2 Answers

The engine of my Lexus has a chirping noise when idling


most likely it is one of your belts or serpentine belt,probably just worn or loose, probably does it worse when turning the wheel back and forth during idle also...

Sep 24, 2014 | 2007 Lexus RX 350

2 Answers

2002 windstar made a loud noise and started smoking underneath the van near the front tires


Have the engine properly inspected as it may be a engine failure due to big end failure causing a hole in the engine block.

Jul 18, 2014 | 2002 Ford Windstar Cargo

1 Answer

Grinding noise when its in nuetral with engine running


There are many possibilities that can cause car to make noise.

It's actually from where the noise is coming from. Front end or rear end. From engine area or from inside the steering or from brakes.


There is N-number of possibilities for the car to make grinding noise or any other kind of noise.


---------

For step by step troubleshooting this problem, I suggest you to refer the help links mentioned below. Its a complete solution with proper explanation to identify the cause of problem: ------


Click the link below: -----




ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

------------------

Car makes clicking noise?

http://howtobyme.blogspot.com/2011/11/car-makes-clicking-noise.html

--------------

Car makes whining noise like driving on rough pavement?

http://howtobyme.blogspot.com/2011/12/car-makes-whining-noise-like-driving-on.html

------------

Chirping Noise From Car?

http://technoanswers.blogspot.com/2011/11/chirping-noise-from-car.html

----------------

What are the possibilities for Clicking noise in car?

http://technoanswers.blogspot.com/2011/11/what-are-possibilities-for-clicking.html

--------------

Squealing at start up on car?

http://technoanswers.blogspot.com/2012/01/squealing-at-start-up-on-car.html

--------------

Chirping sound coming from engine?

http://technoanswers.blogspot.in/2012/01/chirping-sound-coming-from-engine.html

-----------

Vehicle making Clunk Thump Thud noise?

http://howtobyme.blogspot.in/2012/03/vehicle-making-clunk-thump-thud-noise.html

------------


4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

--------------

Heater makes clicking noise under dash on Ford Explorer?

http://technoanswers.blogspot.in/2012/01/heater-makes-clicking-noise-under-dash.html

---------------

Clicking noise under dash and front defroster not working?

http://technoanswers.blogspot.com/2012/01/clicking-noise-under-dash-and-front.html

------------------

Car Brakes Making Noise?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

---------------

Car Alternator making noise?

http://repairhelpcenter.blogspot.com/2011/11/car-alternator-making-noise.html

-----------------

Car Alternator Bearing Makes Grinding noise?

http://repairhelpcenter.blogspot.com/2011/12/car-alternator-bearing-makes-grinding.html

----------------

Engine makes noise and Cooling Fan belt Breaks?

http://howtobyme.blogspot.com/2011/12/engine-makes-noise-and-cooling-fan-belt.html

--------------

Vehicle Makes Clicking Sound While Taking turns?

http://schematicsdiagram.blogspot.com/2011/12/vehicle-makes-clicking-sound-while.html

-------------

These will help.

Thanks.

Nov 28, 2012 | 1995 Isuzu Pickup

1 Answer

My 1997 Malibu is holding up very well. Recently, I have noticed a slight chirping noise whenever I idle (especially after starting the car) and when I accelerate to about 45 or 50. It is NOT a whine...


Remove the serpentine belt notating the direction of travel. Start the vehicle long enough to confirm the chirp is either still present or it has stopped.

If the chirp stops manually spin all the pulley by hand to see if you can duplicate the sound. If nbothing else is making noise and the belt is in good shape put the belt back so that it travels in the opposite direction. If the noise persists replace the belt. If the noise goes away see how long it lasts. I have had many that have not returned after rotating the belt.

One other thing you can try is putting a small dab of di-electric grease on the belt, with the engine off of course. Spread the dab around a little with a finger, again with the engine off. Start the vehicle, give it a couple of seconds to let the grease work around the belt. If the noise goes away replace the belt.

Nov 14, 2010 | Chevrolet Malibu Cars & Trucks

3 Answers

I have a 2005 Jeep Wrangler Unlimited Rubicon - chirping noise


have a local repair facility look at the front and rear universal joints

Mar 09, 2010 | 2005 Jeep Wrangler

1 Answer

Broken a/c compressor


it depends what you want to do. you can take the compressor right out and run a smaller belt.,if it will allow that,or replace it if you want air conditioning.

Jul 03, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1994 Buick Regal 3800 shut off periodically and now won't turn on


Sounds like you need an internal inspection of the engine. Valves, lifters, rods. pistons and rings etc. One of the worst things for cars is to let them sit for years.

May 16, 2009 | 1994 Buick Regal Gran Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...