Question about Hyundai Getz

Open Question

My 2004 Hyundai Getz misfire & RPM stalls. Fuel Injector Replaced. But no improvement?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: check engine light 2004 GMC Yukon

When my check engine light went on, it was a oxygen sensor

Posted on Jan 15, 2009

  • 1118 Answers

SOURCE: cannot get 1987 chevy van 20 to keep running... stalls out

Best do a fuel pressure test. Should have chg. fuel filter from the get go. The only other filter is on the end of the fuel pump in tank. Bad gas and dirty gas will plug up fuel filter, hense burn pump up.

Posted on Apr 11, 2009

honeymokey
  • 3113 Answers

SOURCE: 2004 Isuzu Rodeo 3.5ltr 4X4 hesitation/misfire acceleration

The upper intake gaskets may be leaking. They are made of plastic and metal and will leak air. Do not remove the cover on very top of manifold when changing.

Posted on Jul 24, 2009

  • 11 Answers

SOURCE: 2004 hyundai elantra that surges violently 1000 rpm to 4000 rpm

could be afew things. vacuum leak, one dud HT lead, could be the water temperature sensor, O2 sensor, best to get it checked and get it read for fault codes

Posted on Sep 03, 2009

  • 1 Answer

SOURCE: CHANGING A FUEL FILTER IN A HYUNDAI GETZ

I have an '03 Hyundai Accent 1600cc. I am told by the techies at the local dealer, the fuel filter is ON the fuel tank. You gain access to it by removing the back seat, then opening the panel beneath the back seat. Replace the filter, screw the panel back onto the floor and the job is done....

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The engine is slow to response at low rpm. above 2k rpm the engine response return to normal. spark plug, plug wire and ignition coils had been replaced, but the problem still persist.


Have you run a fault code test on this? Is the fuel pressure within specs under a load? Have you tried cleaning the MAF sensor heated wire?

Jul 21, 2016 | 2005 Hyundai Getz 1.6

1 Answer

97 nissan pick up stalls at 25000 rpm


the injector pump needs service

Jan 26, 2013 | 1995 Nissan Pickup

1 Answer

Hyundai elantra 2002 misfire problem while driving


are the leeds ok and the coils this also causes a miss fire

Aug 16, 2012 | Hyundai Motor 2002 Elantra

1 Answer

06 Hyundai Azera error code p0300, car ran rough at first then ok , check engine came on, Dealer put fuel injector cleaner in it. had problem a year ago and dealer said problem was accellerator pedal...


P0300 is a random misfire detected, and it would cause me to do a good tuneup-clean the throttle body, air filter, fuel filter, plugs, plug wires (if it has them), oil change (just because)-fuel injector cleaner is voodoo and the dealer proved that he did not know what was wrong when he did that in my opinion-while there is nothing wrong with throwing in a bottle of injector cleaner once in a while, it is NOT going to fix a misfire problem-that is probably an ignition issue that may be confounded by a bad fuel filter/air filter or leaking injector o-ring.

Jan 24, 2011 | Hyundai Azera Cars & Trucks

1 Answer

2003 Hyundai Sonata with 4 cyl. PO301 error code. Have replaced spark plugs, wires, coil packs, and mass air flow sensor. Replaced air filter due to heavy gas smell. Car was starting after tapping gas 3...


P0301 - Cylinder 1 Misfire Detected.

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Being you have a heavy gas smell I would look into the injectors. If injector #1 is over producing it can cause a misfire. Test your compression and fuel pressure.

Jan 17, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

PO301 code on Hyundai Sonata. Replaced wires, plugs, coil packs, and mass air flow sensor.


P0301 - Cylinder 1 Misfire Detected.


Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder


Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Jan 17, 2011 | Hyundai Motor 2003 Sonata

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

1 Answer

Stalling,check engine light on,show code po0304(cylinder 4 misfire


CYLINDER 4 MISFIRE COULD BE CAUSED BY BAD SPARK PLUG BAD WIRE FAULTY COIL OR MORE LIKE FAULTY FUEL INJECTOR OR DIRTY CLOGGED FUEL INJECTOR.

Jul 06, 2010 | 2004 Volkswagen Beetle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...