Question about 1988 Ford Bronco II
Dimmer switch may be the problem---the whole cluster mite need replacen---u hav to take off panel and see--get a haynes manual for details-sold at parts store
Posted on Oct 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You don't need to remove the dash. Look under the dash where the switch is located. on the side of the switch you will see a small button to push in. While pushing in on the button pull the knob as though you were going to turn the lights on. At this time the stem should release from the switch. Undo the bezel and drop the switch down so you can see to unplug the wires. Replace wires to new switch and reverse the procedure to install. You don't need to push the button in when replacing the stem.
Posted on Feb 07, 2009
well if it is a 1984 tranny it is a toyo koygo tk4 or tk5, which if mounted in the 84 bronco the transmission sets at a tilt, which means that the transmission crossmember bolts into the frame at a angle.. the mazda tranny was used in 88-90 the transmission crossmember sets straight across and bolts on to the frame on each side with one bolt.. with some major fabricating it is possible but to simply change out nope wont fit..
Posted on Feb 16, 2011
Tips for a great answer:
Aug 30, 2016 | 1988 Ford Bronco II
Feb 07, 2015 | 1988 Ford Bronco II
Dec 22, 2012 | Cars & Trucks
Dec 16, 2012 | Cars & Trucks
Jan 28, 2011 | 1988 Ford Bronco II
Sep 21, 2009 | 1988 Ford Bronco
Nov 24, 2008 | 1987 Ford Bronco II
Jul 01, 2008 | 1988 Ford Bronco II
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: