Question about Mercury Topaz
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fuel Filter
if you have a throttle body fuel injection the filter is most likely a canister type filter inside the frame on the drivers side close to the shifter linkage.
Posted on Mar 18, 2009
It's located in the trunk on the drivers side. You should see a black and yellow sticker below a hole indicating that the fuel pump shut off switch is here. Even if your sticker has worn off, if it's a 92 topaz it most likely will be there in that hole. Shine a flashlight in it and you should see a black unit with a red button on top. Push the button down until it clicks in place. If the button is already down, your problem is something else.
Posted on Apr 07, 2009
Follow the fuel line right up to the carb or throttle body. Sometimes it's a very small "metal can" looking thing that is on the carb end of the fuel line...surprisingly small...not like the bigger in-line filters found along the frame rails on other models. This small can-like filter screws into the carb and the line is attached to same. It's about the size of a quarter in diameter and an inch and a half long.
Posted on Apr 22, 2009
Tips for a great answer:
Aug 26, 2015 | 1988 Cadillac Eldorado
May 31, 2012 | 1992 Mercury Topaz
Jul 29, 2011 | 1988 Volkswagen GTI
Jan 12, 2011 | 1988 Mercury Topaz 2 Door
If the vehicle is equipped with a pressure relief valve, install an EFI/CFI fuel pressure gauge T80L9974B or equivalent and depressurize the fuel system. If the vehicle is not equipped with a pressure relief valve, the fuel filter connection should be covered with a shop rag or towel to prevent the fuel from spraying during the removal procedure. It is also possible to reduce the amount of pressure in the fuel system by locating the inertia switch (usually located in the luggage compartment) and disconnecting the electrical connection on the inertia switch. Next crank the engine for 15 seconds to reduce the system pressure
Nov 01, 2010 | 1993 Mercury Topaz
May 18, 2010 | Cars & Trucks
Oct 05, 2009 | 1993 Mercury Topaz
May 31, 2009 | 1992 Mercury Topaz
Nov 08, 2008 | 1988 Dodge Ram 50
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: