Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Rds radio Procedure
GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
for the 6 digit code that you've written down. Enter that and press
* key. He will then give you a code, and the option to get additional
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
Posted on Oct 23, 2008
You need to replace the handle itself. The inside of the handle where the metal cable fitting attaches causes too much strain on the plastic and the molded groove breaks. Ford has the same problem. I don't know why these car man. dont just go back to all metal exterior handles. If you have time you can probably fix it with epoxy and washers, but the fastest way is to get one aftermarket or from a junkyard. Hope this answers your question.
Please remember to rate this fix.
Posted on Feb 14, 2009
if ur replacing it remove front grill disconnect both lines and carefully remove retaining clips from radiator if replacement is original eguipt mount & reconnect --if its a universal follow instructions usually cut off fittings and use clamps and hose to hook up
Posted on Oct 27, 2009
Tips for a great answer:
Oct 04, 2012 | 2006 Chevrolet Express
Aug 01, 2010 | 2008 Chevrolet Express
May 23, 2010 | 2008 Chevrolet Express
Jan 13, 2010 | 2000 Chevrolet Express Cargo
Nov 20, 2009 | 2001 Chevrolet Express
Jul 27, 2009 | 2006 Chevrolet Express
Mar 11, 2009 | 2008 Chevrolet Express Cargo
Dec 01, 2008 | 2008 Chevrolet Express
Aug 17, 2008 | 2008 Chevrolet Express
134 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: