Question about 2008 Chevrolet Malibu

Open Question

2009 MALIBU HIGH MOUNT BRAKE LIGHT REPLACEMENT

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
lobsterman72
  • 91 Answers

SOURCE: left & right brake light not on

Could be the brake switch that is mounted to the brake pedal area. Check if you have voltage out from there when brakes are applied, there may be two leads one for the high mount and one for regular brake lights.

Posted on Dec 07, 2008

Ad
  • 7 Answers

SOURCE: 2003 chevrolet venture no left & right brake light

you guys checked the fuse box?

Posted on Dec 20, 2008

venexcsd
  • 1185 Answers

SOURCE: high mount brake light works but the regular brake

Same circuit feeds both so I would check the bulbs by replacement and put a meter across the supply line

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 94 Honda accord sedan stop light failure warning will not go out after bulb replacement of center high mount bulb.


Search web for "Brake Light Buld Failure Warning". This is a tiny circuit on the driver's side of the brake light unit. Remove the brake light unit from the rear. Get a replacement or do a bypass.

Dec 30, 2017 | Honda Cars & Trucks

2 Answers

How do I replace the high mount brake light on my 2011 Chevy Malibu?


You need to take the back seat out. Remove the C-Pillar trim panels. Lift up on the package shelf. Unplug the wiring connector. I've had mine out when I changed the speakers.

BTW, Its Not a Bulb. Its a LED Assembly. Replaced as a whole unit. Unless your good with electronics and soldering.

Jul 16, 2015 | 2011 Chevrolet Malibu

1 Answer

Why 2009 Hyundai accent brake lights on with headlights, off without?


If all the brake lights come on ( including high mount ) with the headlights there is most likely a short somewhere. Have any of the park/brake light bulbs been changed recently. If so a bulb may be installed incorrectly or the wrong bulb application used.

Apr 11, 2015 | 2009 Hyundai Accent

1 Answer

Third brake light comes on when brake not pressed


Power to the High mount light must come through the brake light switch OR a short from another wire in the harness. To trouble shoot, disconnect the connector at the break light switch and see if the high mount light comes on that night. If so, it's getting power from a short in the wiring. The wire to the high mount brake light runs in a harness with other wires dash area to the rear lights. That's about 6 feet, not 3,000 feet. BUT it will require removing the plastic trim and carpeting and searching the wire bundle to find the wire that's rubbed through. Not fun, but also not rocket science. A competent electrical tech should be able to remove all that and inspect and repair in less than 6 hours.

Jan 01, 2018 | 2009 Subaru Outback 2.5i

1 Answer

No brake lights check fuses no blown fuses but the center brake light work


If the center high mount brake light comes on when brake pedal is depressed, and the rear brakes don`t come on, and the fuses are not blown, then I would replace the rear bulbs.

May 02, 2011 | 2009 Nissan Altima

1 Answer

HOW DO I CHANGE THE BULB FOR THE HIGH MOUNT STOP LIGHT?


From the Owners Manual

Here's what the Owners Manual has to say about the high-mount brake light replacement:


  1. Pry the light assembly away from its housing and push rearward to disengage it from the retaining clips.
  2. Lift the front of the light assembly from the parcel shelf
  3. Disconnect the light assembly wiring and replace the light assembly.

Oct 25, 2010 | 2005 Ford Taurus

1 Answer

Both tailights out but brake light at top of hatch does work


it's gotta be burnt out bulbs , because they are on the same circut as the high mount light.

May 29, 2010 | 2009 Chevrolet Aveo

2 Answers

How do you replace the third brake light bulb?


If you do not know what you are doing you should go to a mechanic. A simple slip with a screw driver can cost a lot of money.

Aug 24, 2017 | 2004 Chevrolet Malibu Maxx

Not finding what you are looking for?
2008 Chevrolet Malibu Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...