Question about Ford Explorer Sport Trac
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to remove the right
Removal & Installation
Front brake disc
Front axle wheel hub nut and discard the nut
Tie rod end and separate the lower ball from the steering knuckle
Halfshaft from the steering knuckle
Lower ball joint to steering knuckle. Torque the pinch bolt to 52 ft. lbs. (70 Nm).
Tie rod end. Torque the nut to 41 ft. lbs. (55 Nm).
New front axle wheel hub nut. Torque the nut to 214 ft. lbs. (290 Nm).
Front brake disc
To be very honest, a manual to help guide you thru this process should be obtained due to special tools that will be required for this repair procedure. This is a fairly large job, and I do recommend a manual. We do not have full manuals on this site due to copyright laws.
Posted on Oct 10, 2010
remove the right front wheel. remove the axle nut. remove the ball joint bolt and nut. remove the ball joint from the knuckle. drive the axle out of the hub. remove the 2 carrier bearing nuts. pull the axle out. make sure you torque all bolts and nuts.
Posted on Sep 17, 2011
Not at all providing you jack up both sides of the vehicle at the same time or they will not go on
Posted on Mar 04, 2013
Tips for a great answer:
Feb 03, 2016 | Ford Cars & Trucks
Oct 07, 2015 | Ford Cars & Trucks
Sep 17, 2011 | 2003 Ford Escape
Feb 19, 2010 | 2007 Ford Explorer Sport Trac
Sep 15, 2009 | 2003 Ford Explorer Sport
Sep 05, 2009 | 2003 Ford Explorer Sport
Jul 19, 2009 | Ford Sport Trac Cars & Trucks
Jul 09, 2009 | 2003 Ford Crown Victoria
233 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: