Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Here is some information that I find useful when wiring trailer connectors, and the brake controller should be wired into the vehicles wiring according to the instructions that came with the brake controller and that identifies each wire from the brake controller.
Be sure that you solder all connections well for the best operation, and you should use 10 or 12 ga. wire for the Pos. (+) connection, and the ground or Neg. (-) connection, and you should run both wires all the way out to the battery, and about one foot from the battery on the Pos. (+) wire to the battery, make sure that you use a 20 or 30 amp Circuit Breaker and Do Not Use A Fuse.
The rest of these diagrams should help you to get your trailer properly wired up.
Posted on May 15, 2010
Tips for a great answer:
Apr 15, 2018 | GMC Cars & Trucks
Feb 18, 2013 | 1990 Chevrolet C1500
Jun 28, 2012 | 1995 GMC Sierra C1500
Feb 14, 2018 | 1986 GMC C1500
Sep 24, 2010 | 1990 GMC C1500
May 05, 2010 | 1990 Chevrolet C1500
May 04, 2010 | 1995 GMC Sierra C1500
Nov 02, 2009 | 1990 Chevrolet C1500
Mar 04, 2009 | 1990 Chevrolet C1500
110 people viewed this question
Usually answered in minutes!