Question about 2004 Chrysler Town & Country
Check underneath that the fuel line has not been broken from the smash or a rubber hose has not come loose. The fuel lines run under the floor just inside the rocker panel (bit under the door) and any damage to the outside may have ruptured the fuel line.
Posted on Oct 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 Chrysler Town and Country
Ok, i'm assuming your replacing them, there is an oval rubber stopper on the backside of the rotor, in the backing plate, located near the bottom. it will tighten or loosen the e-brake shoes inside the rotor, loosen them all the way off, then get a big hammer and give them a really good smack, be carefull not to damage the wheel studs, if your reusing them hit on the hat of the rotor, if replacing you can hit right on the rotor face.
Use some antiseize on the hub before installin your new rotors, and don't forget to readjust your
e-brake and reinstall the rubber plug
Posted on Nov 18, 2008
try checking the tank u do have to lift it with a jack but if its not the tank then it could be comming from the gas line which is under the van as well.
Posted on Nov 22, 2008
Take off whatever screws you can find. I believe there are 2 or 3 along the botttom, 1 in the pull cup and there may be another one somewhere around the switches. Then stick a flatblade screwdriver up into the bottom between the plastic and sheet metal and pry outwards. Feel around for a plastic clip and try to pry right next to it if you can to avoid breaking the panel. Once you've got the bottom loose, just reach in there and pull the whole thing away from the door. There's gonna be a few electrical connectors and a rod that goes to the interior release handle. Don't forget to hook that thing back up when you put it back together. Those plastic clips go all the way around the door and you're gonna break a few of them. Don't sweat it though. They only cost a couple of bucks a piece and generally don't need ALL of them anyway.
Posted on Apr 18, 2009
Remove all the screws you can, I think there are 4-5. Then, there are plastic snaps all the way around the bottom. (buy new snaps before hand) Pull from the bottom, it will feel like you are breaking it, but its just the snaps. Disconnect the power window wires, mem seat wires, and the metal bar for the door latch. Be careful not to damage the wiring!
Posted on Jan 24, 2010
Tips for a great answer:
Dec 02, 2016 | 2003 Chrysler Town & Country
Sep 14, 2013 | 1998 Chrysler Town & Country
Feb 06, 2012 | 2002 Chrysler Town & Country
Jul 11, 2011 | 2005 Chrysler Town & Country
Jan 20, 2011 | 2002 Chrysler Town & Country
Jul 07, 2010 | 1996 Chrysler Town & Country
Aug 22, 2009 | 2001 Chrysler Town & Country
Jul 13, 2009 | 2003 Chrysler Town & Country
Mar 27, 2009 | 2002 Chrysler Town & Country
Oct 30, 2008 | 2002 Chrysler Town & Country
Feb 25, 2015 | 2004 Chrysler Town & Country
130 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: