Question about 1996 Ford Crown Victoria

1 Answer

94 Crown Victoria air conditioner won't kick on

The compressor will not come on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

It may need a charge of 134a,to check to see if the compressor is good then unhook the plug at the air dryer(silver canister) should be a light green wire and a black wire,put a paper clip as a jumper between the 2 wires and turn it on,if the compressor works then you need a charge,if it doesnt work then it could be a fuse or relay but that doesnt happen too often

Posted on Apr 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 crown victoria stalled and won't start


Did the battery fail?

Won't start or only clicks or does nothing
else?

Does the engine turn over fast or nothing?

Jan 31, 2013 | 1994 Ford Crown Victoria

1 Answer

Surging


Hi billberger2

When the air conditioner turns on, the car computer also increases the engines revs to counter the load of the air con. It should not generally be noticeable however. Will do some research to see why. :)

regards
robotek

Jun 20, 2008 | 2001 Ford Crown Victoria

2 Answers

1992 CROWN VICTORIA LX I REPLACED FUSES INSIDE AND UNDER HOOD FOR AIR RIDE SUSPENSION AND IT STILL WON'T AIR UP. PLEASE HELP


Air ride suspension basically works like this. you have a small air compressor and a sensor that connects between the rear axle and the under body Frame. When this sensor detects a load movement like more or less weight it turns on the air compressor to air up or opens a exhaust valve to let air out. most common problems with this system. broken or disconnected sensor. leak in the air lines between compressor and shocks. or a bad or weak compressor.

Feb 08, 2011 | 1992 Ford Crown Victoria

1 Answer

Where can i locate the air suspension compressor for a ford crown victoria 2004?


most of theford air compressors are located towards the front of the fender wheel well in the bottom corner some times under the plastic water tanks

Mar 17, 2010 | 2004 Ford Crown Victoria

1 Answer

My transmission on my 94 crown victoria seems to


have the fluid changed, the new fluid should cure this.

Nov 02, 2009 | 1994 Ford Crown Victoria

1 Answer

1998 Crown Victoria air conditioner


Fuse 9, 50A under hood, Fuse 5 15A Instrument panel. If they're ok, make sure the compressor clutch can be turned by hand (engine off, obviously). If not replace the compressor. Most common problem is the cycle switch. That should be the electrical connector on top of the accumulator. Just jump that by backprobing the connector on both sides with a pinand connect them, with the car on and a/c on if the compressor clutch engages, replace the switch. If it doesn't, try wiggling wire harness and watch it, if it engages, find a broken wire and repair it.

Aug 11, 2009 | 1998 Ford Crown Victoria

1 Answer

How does one reconnect the air suspension


You probably have a leak in the system. Did "they" check the lines and air suspension? "They" probably disconnected the compressor to keep it from burning out from overuse. You need to fix the leak before reconnecting or the compressor will wear out very quickly.

Aug 09, 2009 | 1995 Ford Crown Victoria

1 Answer

I want to recharge the air conditioner on a 1992 crown vic


find your evaporator inlet outlet lines on the fire wall usually near heater core inlet outlet lines. then follow both lines until you find the one that goes to the compressor. that is your low side and the port should be on there

Jun 26, 2009 | 1992 Ford Crown Victoria

2 Answers

2000 Ford Crown Victoria


when you hold the accelerator does the vehicle stay running? if so the problem is in ithe IAC idle air control motor, take a small screw driver and using the handle tap the iac motor and usualy the motor will kick in and the vehicle will run fine then if the problem is rectified replace the IAC

Nov 24, 2008 | 2000 Ford Crown Victoria

Not finding what you are looking for?
1996 Ford Crown Victoria Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5677 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...