Question about 1998 Dodge Ram 1500 4WD

1 Answer

How do i remove a right front cv axle from a 2002 dodge ram 1500?

I got the axle loose from the knucke i just cant get it out of the faxle tube.

Posted by on

  • Richard Scordino May 11, 2010

    Don't know for sure if dodge uses this design but check inside the diff and see if there is a "c" clip on the axle end holding it in place.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

For around $20. buy a Haynes or Chilton's repair manual. It will walk you through this repair and give you the needed torque specs. so you don't over or under tighten anything. But you were able to succesfully the splined end. Going into the hub then all is left is to release the cir-clip on the other end. Yes, there should be a C clip.
Look at a new one or repair manual to verify.

Posted on May 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle


Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    https://www.youtube.com/watch?v=WvRyg95cUIQ
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

How do I replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change...


Lift and support front end on suitable jack stands preferably on frame. Remove right front cv axle, stub shaft, and seal. You will need to pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of differential there will be an 8 mm head bolt holding spider gear cross-shaft. Remove bolt and cross-shaft only! Push inner axle in until clip clears inside of passenger spider gear. Set clip aside and push/pull axle shaft straight out to passenger side.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

2006 dodge ram 1500 lower aframe replacement


remove the axle nut and pull the axle off of the hub. Now you should have enough room to get the ball joint out.

Jan 30, 2015 | 2006 Dodge Ram 1500

1 Answer

I have a 03 Dodge Ram 2500 Hemi 4X4 that is making a very loud knocking sound in the frontend when I turn left, or right.


check the cv axles at the front differential. inner joints get loose on the splines and cause a knocking noise.

May 16, 2012 | 2004 Dodge Ram 2500

1 Answer

Growling coming from front differential


There's not really a best way. If the axle half shafts bolt to the housing just drop it right out. If not you'll have to remove both half shafts from the wheel hub. Disconnect the drive shaft, and drop it out.

Mar 26, 2009 | 2004 Dodge Ram 1500

1 Answer

2002 Dodge Ram 1500 4 w drive rear rotors


Can't tell you exactly how because i don't know what axle you have, but usually just take the main nut in the center off will bring it right out. Remove the wheel, and the brake calliper first and see if it comes off then remove the center nut.

Mar 20, 2009 | 2001 Dodge Ram 1500 Truck 2WD

3 Answers

Front end vibrations at highway speeds


sounds like you may have unbalanced tires. take your vehicle to a tire shop and have them balanced

Dec 24, 2008 | 2005 Dodge Ram 1500

6 Answers

Clicking noise in front end 2001 dodge ram 4x4


I have a 2002 Dodge 1500 Ram 4x4, quad cab and had the same problem. In 2wd the clicking was constant, in 4wd it would go away. Also I had no 4wd while in 4wd, found that out after a snow storm. I took my truck to a buddies garage (a Dodge mechanic), he said this is a common problem. He pulled the drivers side wheel, hub, axle and stub axle. The stub axle splines where it goes into the CV joint and and the internal splines in the CV joint were gone. Almost smooth even. The wheel bearing was completely wore out too. I ended up replacing the hub assembly, both the inner and outer axles. Not a cheap fix either I have about $600 repair bill, but it's back on the road now smooth and quite.

Dec 19, 2008 | Dodge Ram Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...