Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Withoutknowing if the check engine light is on it could be a variety of things including but not limited to the o2 sensor, throttle positioning sensor, and the MAF and MAP sensors. Best diagnosed by using an OBDII scanner to scan for codes. If no codes are present I would then check for the pressure coming from the fuel pump to make sure it is still functioning.
Posted on May 21, 2009
Do it run rough. You probable have a misfire. possible leaking injector. I have seen many ignition coil fail on those vehcles.
Posted on Jul 07, 2009
I had the same problem with my 96 Dodge Ram, it would crank up but if you let off the gas it would die. It needs a map sensor!!
Posted on Jan 12, 2010
The idle relearn needs reset. Keep your foot on the gas at about 900 rpm. Make it idle for about 5-6 minutes. Slowly ease up on the gas until it will idle on it's own, it might take a while. After you get it to idle, it might be idling real low, but on its own, Let it sit and idle until for 20 minutes. After that it should be back to normal. You will have to do this every time you have the battery unhooked for a while.
Posted on Jul 27, 2010
Tips for a great answer:
Jan 05, 2017 | 2006 Chrysler 300C Base
Feb 03, 2016 | Dodge Cars & Trucks
Apr 18, 2013 | Cars & Trucks
Feb 11, 2013 | 2003 Dodge Durango
Nov 19, 2012 | 1991 Pontiac Bonneville
Sep 09, 2011 | Chrysler Sebring Cars & Trucks
Aug 27, 2017 | 1998 Jeep Grand Cherokee
Feb 23, 2011 | 2005 Chevrolet Impala
Nov 01, 2010 | 2007 Chrysler 300c AWD Sedan New Cars
Jan 20, 2009 | 1997 Dodge Dakota
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: