Question about 1997 Plymouth Voyager

1 Answer

Need to change water pump in 99 plymouth voyager 3.0 liter

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.

To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.

  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs.
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50 / 50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.

Posted on Oct 16, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 328 Answers

SOURCE: 94 Plymouth Voyager Water Pump

thw water pump stuff you need is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280215d73

The heater stuff is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280216054

Hope this helps! good luck!

Posted on Jan 15, 2009

motor1258
  • 6674 Answers

SOURCE: blower motor

It's in behind glove box, you will probably have to remove glove box, but a good look up from under will tell you. You did check fuses & resistor right? Did it run for a while on high only?

Posted on Feb 08, 2009

  • 323 Answers

SOURCE: Where is the water pump located on a 99 plymouth voyager, 3.0Lit?

It is driven by the timing belt. You'll need to support the front of the engine, remove the mount and timing covers. The pump sits in the center between the heads and has a tube running into the back of it that sometimes is difficult to get out. If you are uncomfortable with setting up the timing belt you may want to have a professional do the job.

Posted on Jul 24, 2009

  • 1779 Answers

SOURCE: my water pump went on my 98 plymouth voyager how much will it cos

You don't mention what engine you have ( there are 4 cyl, or 2 v-6 choices 3.0L or 3.3L available for that year). The water pump costs anywhere from $50 to $80, depending where you buy it, labor is supposed to take about one hour (access to the water pump is through the wheel well, after removing the plastic liner). There are other things that can raise the cost: how old is your coolant? This is a good time to have it changed if it needs it, what is the condition of the serpentine belt? It has to be removed to replace the pump, so again, if it needs to be changed, this is the time to do it. Dealers are charging about $100 an hour in my area, private garages less, and there will be additional charges for 'environmental' concerns, which is basically properly disposing of parts and fluids. So, the best thing to do is check with your local dealer and service stations and get an estimate on the work, and if anything else is needed (coolant, belt, etc) for a price in your area. With the economy not doing well, there should be plenty of repair facilities eager to give you an estimate. Good luck.

Posted on Oct 09, 2009

  • 564 Answers

SOURCE: need to change power steering pump on 99 plymouth

its easy to do but if you want a manual chilton has one you can find the manual you speak of at auto zone for under 20 dollars. it will gve you step by step for any part on your car.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get the side plate off a 99 plymouth voyager to change the water pump


Go to online site of autozone, oreillys...etc and you may have to register but they have free online step by step manuals. This has worked for me several times.

Nov 03, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

I need a firing order for a 1988 plumouth voyager


1988 Plymouth Voyager 3.0 liter SOHC V-6 VIN "3"

08a7abc.gif



1988 Plymouth Voyager 2.5 liter SOHC L4 VIN "K"

2939929.gif


Hope helps(remember rated this).

Aug 15, 2010 | 1988 Plymouth Voyager

1 Answer

How to change waterpump on a 99 plymoth grand voyager 3.3 motor


i need your help about problem water pump. I did exchanged new water pump. but it keep increase hot up .. i still figure something out about water pump. do you think fan cooling broke either fuse blow out .. thank you ..

Jan 17, 2010 | 1998 Plymouth Grand Voyager

1 Answer

Need firing order for 1990 plymouth voyager


1990 Plymouth Voyager 2.5 liter SOHC L4 VIN "K" and 2.5 liter SOHC Turbo L4 VIN "J"

2306307.gif


1990 Plymouth Voyager 3.3 liter SOHC V-6 VIN "R"

8a7c741.gif


I hope helps with this (remember rated this help) Good luck.

Dec 21, 2009 | 1990 Plymouth Voyager

1 Answer

Locter heater coil 99 plymth grnd voyager 3. liter


it is under dash, drivers side. dash has to be pulled for installation. go to PDF PDFTown.com. should have instructions, or go to auozone.com, and register for znet. it has installation for your HEATER CORE there. good luck.

Sep 01, 2009 | 1990 Plymouth Grand Voyager

2 Answers

Where is the water pump located on a 99 plymouth voyager, 3.0Lit?


It is driven by the timing belt. You'll need to support the front of the engine, remove the mount and timing covers. The pump sits in the center between the heads and has a tube running into the back of it that sometimes is difficult to get out. If you are uncomfortable with setting up the timing belt you may want to have a professional do the job.

Jul 18, 2009 | 2000 Plymouth Voyager

2 Answers

Where is the water pump located 99 plymouth voyager


the reason u can't see the pump is because it is driven by the timing belt and is hidden under the plastic7b4ce03.jpg cover that is over that belt.

Mar 06, 2009 | 1999 Plymouth Voyager

Not finding what you are looking for?
1997 Plymouth Voyager Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...