Question about Kia Sephia
Low fluid or too much ATF? (foaming it up and killing bearings)
p07xx is tranny DTC codes. (errors)
TCC lockup failure. (the TCM commanded the lock and
the tail shaft sensor did not rise in RPM
that is the engine RPM does not match tail RPM or 1:1 ratio.
which is LOCK ratio.
1500 is speed sensor , reads wrong,
No Vehicle Speed Signal to TCM.
MIL Request Signal from TCM to ECM.
the means simply the Tcm SAW and error and sent that error up stream to ECM. creating 1500.
remember the ECU never knows what part is bad.
NEVER ! it only knows, the tests failed. (monitors)
the first thing i do is find out which VSS failed.
on some cars there are 2 to 5
the first speed sensor is RPM does the scan tool show correct engine RPM? y/n
does the scan-tool show correct MPH? sensor 2.
y/n if not fix that first.
the TCM function (tranny brain must not be lied to, in this order)
engine RPM , MPH.
and last the tranny its self as VSS (rpm) sensors. 1 to3.
my guess, (too lazy to look it up) has 1 sensor on the tranny tail.
if all is good and 1500 means VSS 2 tranny tail is fibbing.
then its one of 3 things.
(all others good)REMEMBER the TCM does comparisons to all speed sensors to shift the car correctly so the front sensor count first. then last the rear.
VSS2 lies. this is bad bad tranny (slips) bad wires to VSS2 or bad VSS2.
most TCM go to limp home when the tranny slips to stop burning up the clutch packs. may skip gears too.
now what does slips out of gear mean. a neutral FLARE?
or down shifts,
if the tranny ever slips. this is bad news.
if it does slip 1500 is only the warning that it did
it say RPMs go out of control and threw 1500 pronto.
Try to think(sic) like a TCM what would you do if the tranny malfs.
answer, throws codes.
and goes to limphome, if necessary, (FSM show these facts)
so does alldata dot com
what i do is try to get tranny to slip. using all gears.
if it slips ,its bad.
The TCM can not run a slipping tranny.
the TC does slip, but the TCM has that all figured out. (modeled)
not locked, and locked it must not.
good luck and do ask questions.
Posted on Oct 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You will need to contact the dealer. Radio codes are only supplied thru the dealer or you can search online for places that sell the code.
Chances are you will need to pay for the code or replace the radio with one that is an upgrade with no code needed.
Posted on Dec 18, 2009
Code number p1624 is MIL Request Signal from TCM to ECM. which means malfunction indication light(MIL) is requesting a signal from your engine control module(ECM) or Transmission control module(TCM) i would reccomend u take it to the dealership to get it checked out.
Posted on Jun 09, 2009
the computer is going into limp mode cuaseing it not to change. only way to fix the problem is having a scanner hooked up to it to find out what code/s it is showing
Posted on Jun 04, 2009
Tips for a great answer:
Jan 12, 2016 | 2000 Kia Sephia
May 20, 2014 | 2001 Kia Sephia
Mar 02, 2014 | 1998 Kia Sephia
Jan 04, 2011 | 2001 Kia Rio
Dec 03, 2010 | 2001 Kia Sephia
Feb 19, 2010 | Hyundai Motor 1999 Elantra
Jan 28, 2010 | 2000 Kia Sephia
Jun 09, 2009 | 2001 Kia Sportage
Nov 11, 2008 | 2000 Kia Sportage
473 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: