Question about 2002 Ford E250

1 Answer

2002 e250 van just shut down and wont sart. I put gas in it but no go

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,113 Answers

You have to first test if you have 1) A spark 2) fuel. Try turning the engine over and check for the smell of fuel from the engine or exhaust. If you smell fuel then you may not have a spark. If it is a fuel problem it could be the fuel sender unit inside the tank. It could also be a bad ground or a broken wire going to the sender unit. Test one idea at a time until you narrow down what is not working.

Posted on Oct 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the a/c check valve and vacuum cannister on a ford 2002 e250?


The vac tank is usually in the engine compartment, don't know about a check valve for the a/c unless you are talking about the HVAC control on the dash.

Jul 10, 2012 | 2002 Ford E250

1 Answer

I have 94 e250 5.8L van 4x4 and it won't turn over


Hi Nick:
You wll have to pinpoint what the engine is missing...
- Spark
- Fuel
- Compression

All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.

Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 09, 2012 | 2002 Ford E250

1 Answer

I have a 2002 Ford E250. It does not want to start. It is cranking ok but it feel as if it's not getting any gas.


Change fuel filter , it's on driver side , a little behind driver seat under the van, you'll need two wrenches same size

Jan 23, 2012 | 2005 Ford E-250 Van

1 Answer

E250 ford van suddenly started blowing hoses off that go to the egr position valve sensor. Even when both hoses are on the 5.4L engine has no power. It will take off ok as long as I take off slowly....


Most likely the catalitic converter is restricted causing excessive exhaust back pressure which blows the hoses off and causes the no power issue

Dec 17, 2010 | 2002 Ford E250

1 Answer

When ever i come to a stop ,my e250 van ford shuts off,i get a p1518 code


The intake manifold runner control is stuck open due to either a linkage issue or the controller itself. With it stuck open the engine has much more airflow at idle causing the stall.

Feb 27, 2010 | 2002 Ford E250

1 Answer

Just put gas in car but it is acting like its out of gas,


sounds like bad gas. go to local Napa parts tore and buy something called Sea Foam and put it in tank. It will work wonders.

Jun 03, 2009 | 1999 Chrysler Town & Country

1 Answer

I need to siphon the gas out of 2002 Town & Country van.


you should try a smaller hose like 3/8 an try to work it back and forth if that wont work look under the car where the fill line meets the tank sometimes theres a rubber hose where u can disconnect the fill line at the tank and gas cap then put aside and siphon closer to tank

Mar 27, 2009 | 2002 Chrysler Town & Country

1 Answer

Driving along interstate 90 and all of the sudden, my E250 seems to be losing power and the yellow service engine soon light comes on and a red light that looks like oil. the van's fan comes on and the...


I'm getting the same message, when I'm driving at about 65 mph van starts losing power, kind of "coughing". I've been told that could be either fuel inyector or the need of a good tune-up. I'm taking my van (2002 E250 V8) to the dealership, they have the special equipment to zero into the problem and fix it,

Aug 05, 2008 | 2004 Ford E250

Not finding what you are looking for?
Cars & Trucks Logo

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...