Question about 1993 Chevrolet S-10 Blazer

1 Answer

4hi is not working

I have a 1991 s10 blazer 4x4 and my 4hi is not working but 2wd and 4low are. when try to put in 4hi both lights stay on and dont hear the front differential engage. now when i switch to 4low to hi the front diff kicks in but 4hi light off and hear the 4hi tryng to engage it sounds like someone taking a picture. i replaced the whole push button switch too. whats the problen can anyone help?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try seeing if the cable going to the front differental is pulling in to engage the front axle?

Posted on Apr 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The 4x4 in my blazer works only in 4 low sometimes the lights for the switches dont go on the 4hi doesnt work when i press on the brakes while in 4low the rear wheels keep spining and push the blazer...

Ineed to know what kind of shifting system you have. Is it a shift lever or a push button systemThe fact that it works sometimes is a good sign. So this means its not completely broken and could be a simple adjustment

Jan 20, 2011 | 1994 Chevrolet S-10 Blazer

1 Answer

Ive go a 1990 s10 4x4. The lights dont come on for 4hi.

First check the connection at the switch. I have found alot of the time the switch has been the prob. 2nd,the selinoid[electric] at the transfer case may need to be taken apart and cleaned if it has not been used for a while...hope this helps.

Dec 21, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

95 chevy blazer 4low works..but when shifting into

My guess is that it is probably the actuator on the front diff. It may also be the buttons. I had the same problem with my 1999 silverado which it turned out to be the actuator.

Dec 14, 2009 | 1995 Chevrolet Blazer

1 Answer

I have a 94 S10 Blazer four wheel drive push button.My vehicle will not come out of 4hi or 4low.When I push the button for it to go out of 4hi or 4low I hear noise somewhere but it does not come out.Do you...

I had this on my 2002 blazer (4wd 4dr 6cyl) about a year and a half ago. I found two things out. First, have to try shifting out of 4lo while in neutral with foot on the break. It seemed to work better while on a small incline (like waiting to put the boat into the water, not on the ramp but the somewhere shortly before ramp).
I finally decided to try to replace the neutral safety switch after much reading online. It worked and has worked perfectly since then. The shops I took it to told me to put in a whole new motor for about $600. I think I got the safety neutral switch for about 50ish. I have a pit in the garage so it was pretty easy to get under the truck to the transmission and remove the existing switch board. I then just attached the new one and plugged 'er in.
Hope it helps, good luck.

Mar 20, 2009 | 1995 Chevrolet Blazer

1 Answer

On my 2000 chevy S10 blazer, when I push the 4HI button, the 4HI and 4LO buttons flash a yellow light and it won't shift to 4WD, stays in 2HI and the light in the 2HI button is on yellow......I hear...

vacuum leak or vacuum locker solenoid problem. a great way to check for both is to remove both vacuum lines from the solenoid (located on firewall above destributor), and put a connector between them, push the button on the dash and see if it locks in.

Jan 18, 2009 | 1999 GMC Jimmy

1 Answer

96 Chevy Blazer Stuck in 4hi

try reverse and push the button

Jan 06, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1993 Chevrolet S-10 Blazer Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides