Question about 2005 Porsche Boxster

1 Answer

Scanner code P 2231 - 2005 Porsche Boxster

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 170 Answers

Auto Zone, or any other parts store would have the key to all automotive vehicle codes, as would any mechanic or dealer service dept.

Posted on Oct 16, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you find what check engine code is up without an scanner?


then scanner will show a code (po**** or p**** or a series of dots and dashes) You then have to refer these codes to a manual for interpretation of the faults. ie code on scanner p0707 . refers to TR sensor switch and a number of possible causes that will cause this code.. With out a scanner you cannot read any codes

Dec 24, 2013 | 1998 Plymouth Grand Voyager

1 Answer

Code p 2231


Auto Zone, as well as any mechanic or dealer service dept. would have the key to any vehicle codes.

Oct 15, 2013 | 1995 Volkswagen Jetta

1 Answer

Can U581 code reader scanner read fault code of Mitsubishi?


all depend of the chip inside. Go to the manufacturer or supplier and get assistance ONLINE via chat .

God bless you

Jun 20, 2013 | Cars & Trucks

1 Answer

1997 Venture ABS light is on but has no code reading


Not all OBD-2 scanners are created equal. Most only read power-train (engine/transmission) codes and are not capable of reading ABS codes. Some scanners even have a specific button you have to press to get ABS codes. Try a different scanner. I know places like Auto Zone will scan codes for free but not every store has the same reader. The AZ nearest to me has the ABS capable scanner while the one on the other side of town can't read ABS codes.

Apr 29, 2012 | 1997 Chevrolet Venture

1 Answer

How to read TCM codes with OBD scanner?


Really that is all you need unless you want to spend $200 on a better scanner. Post that code on line and you will get the problem and fix suggestions. Or purchase a repair manual (Haynes) which has the codes and sensors listed but leaves the repair solutions to you. Remember that a code can be caused by more than just a bad sensor so be careful.

Dec 21, 2011 | 2003 Dodge Intrepid

2 Answers

The code readers lights up but it will not read the codes


the engine has to be off abd the key in the on position.

Feb 21, 2011 | Ford Freestar Cars & Trucks

2 Answers

WHY CAN'T I GET ANY CODES ON MY 1994 3.4 CAMARO USING A OBD1 CODE SCANNER? USING AN ACTRON CP9001 SCANNER. CHECK ENGINE LIGHT COMES ON BUT DOES NOT FLASH. SCANNER WORKS FINE ON MY 1993 GMC SIERRA 4X4.


The only way those type of scanners will give you a code is if it is a hard code. When a check engine light is on, but doen's flash it is usually referring to an emission problem. A flashing light refers to misfire. Spark plugs, wire, etc. A snap on scanner or Genesis Scanner is able to look at perimeters inside the system which is a better approach when you don't have a hard code. Sometimes after the code is on long enough it will become a hard code and the type of scanner that you have will pull it. The thing that often happens is the EGR isn't circulating properly and you get an intermediate light and don't get a hard code for a while which leaves you in the dark. You might take your vehicle to a local service shop which uses a better scanner and they can look at what is going on and solve that problem.

Mar 07, 2010 | 1994 Chevrolet Camaro

2 Answers

Engine light came on kia 2007 rondo


you need to have the code read to see what it is most auto parts store can do that for free that will help use tell you what it is

Mar 03, 2010 | 2007 Kia Rondo LX V6

1 Answer

Where is the reset for 2007 nissan sentra fuel pump


How To How to Reset the Computer on a Nissan Sentra When the check engine light illuminates on the dash in a Nissan
Sentra, it is an indication that the computer has recognized a problem within its sphere of influence. Once the problem has been addressed and corrective action completed, the computer can be reset by erasing the existing codes.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Instructions Things You'll Need:
  • Code scanner
  1. Step 1 Insert the code scanner's connector into the OBD port located under the dash to the right of the steering column.
  2. Step 2 Turn the ignition key to the run position. Make sure the engine is off.
  3. Step 3 Press the button for "Read" on the code scanner. Within less than 1 minute, the scanner will display all failure codes that are stored in its memory.
  4. Step 4 Write down the failure codes displayed by the scanner. Cross-reference the codes with the code sheet that comes with the scanner. The codes are displayed with a letter followed by a four-digit number code. Deciphering these codes by cross-referencing them with the code sheet offers an explanation of the failure.
  5. Step 5 Turn the key off. Correct the failure so that the computer can be reset.
  6. Step 6 Turn the ignition key on, keeping the engine off. Press the "Erase" button on the scanner. Start the vehicle and allow it to run for 5 minutes. Watch for the check engine light to come back on. If it does, the problem has not been corrected. If it stays off, the problem has been successfully resolved.

Feb 07, 2010 | 2007 Nissan Sentra 2.0 SL Sedan

1 Answer

I have a 02 TB and throws a code of P1271 I changed the apps and it still is giving the code I checked chevy forums last night and some said check the fan cluch I cleared the codes unpluged the fan and no...


you have to clear code with a scanner sorry hope this helps i to have had better days if you cleared codes with scanner then try unhooking batterie for 2 minutes negative side then clear with scanner again and recheack scanner for code you must clear with a scanner there is no other way

Dec 04, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

907 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...