Question about Mitsubishi Lancer

2 Answers

Mitsubishi lancer 2005 today in road my car stop when i see the engine go fast heat up and then the water falling down.after the 30 m car is start but the water is still falling down near water pump area...what can i do

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 359 Answers

It looks like you have a coolant leak. You need to fill it up and bring it to a mechanic as soon as possible and get the leak fixed.

Posted on Oct 15, 2013

Testimonial: "thanks..Mr Fatal."

  • Level 1:

    An expert who has achieved level 1.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 23 Answers

Your water pump has a seal broken or cracked. You need to have it replaced. If you do have it replaced make sure you get the timing belt changed over at the same time. It is in the same area (all driven off the same belts etc and will save you on labor when the time comes to replace it).

Posted on Dec 12, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: i have a 2000 oldsmobil

I would say you have an air lock in the cooling system and it needs to be bled. Your water pump is cavitating, meaning an air bubble developes around the water pump impellars, an can't circulate the water.
Bill

Posted on Nov 19, 2008

ilragatzzo78
  • 241 Answers

SOURCE: want engine / wiring diagram for Mitsubishi Lancer Ralliart Sport

i need your email so i can send you the images i cannot load them here for some reason

Posted on Jan 08, 2009

  • 548 Answers

SOURCE: 2005 honda accord could not start

My daughter's Camry did the same thing. Odds are the battery is shot. Pull it out and take it by a parts store to get it tested. Her's showed a bad cell and once a new one was put in, the problem went away.

Posted on Jan 25, 2009

Murphybanton
  • 2004 Answers

SOURCE: fuel pump in a mitsubishi lancer 91.

The fuel pump is located in the fuel tank and you can reach it by removing the back seat.

Rate this fixya!

Posted on Aug 05, 2009

  • 713 Answers

SOURCE: hi..where can i download repair manual for lancer GLXi 2005

Hi,you can download the manual for your mitsubishi at www.manualsonline.com,www.manualnguide.com and www.mitsubishi.com. please don't forget to rate this solution positively Thanks and good luck

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a CS 2005 MITSUBISHI LANCER AND MY CLOCK, RADIO, INTERIOR LIGHT AND CENTRAL LOCKING HAVE STOPPED WORKING. ALL THE FUSES HAVE BEEN CHECK BOTH INSIDE AND UNDER THE BONNET AND THEY are fine


Your vehicle has similar signs that some VW's showed in the early 2000's. Depending on where you live, here in the Midwest, we found a main wiring harness that ran under the inner edge of the driver side, under carpet was exposed to salt and water during the winter. This caused connectors to brake and cause many issues.

As for your issue, seems that all these components may be sharing the same electrical circuit and therefore not working properly.

Nov 18, 2016 | 2005 Mitsubishi Lancer

1 Answer

As soon as i turn the key on(without starting the engine), the radiator and a/c fans starts.


This sounds like the heat sensor in the engine cooling system is failing/has failed completely (internal switching contact remains closed). The engine cooling fan should only come on at the prescribed heat temperature but will also remain active after shutting the engine down, if the engine temp is still above the prescribed temp. Regarding the A/C fan, this is most likely a wiring fault, possibly a short circuit with the car's ignition circuit.

Jul 25, 2014 | 2005 Mitsubishi Lancer 1.6

1 Answer

Stop engine water leak


Replace the water pump. Don't run the car if overheating. Replace the water pump.

Oct 15, 2013 | 2005 Mitsubishi Lancer

3 Answers

My 2003 lancer over heated and won't start now.


too late, but the answer is: when the water system loses enough water, there is a sensor in the water inlet that tells the computer that there is no water, then the computer will not allow the engine to start, I check it on a radiator change I had to make a lancer 2006, we wanted to move the car a few meters but did not start because the hoses were not installed and the block had no water, so we had to start pouring water with a garden hose to the water inlet of the block and in that way started the engine.

Sep 16, 2011 | 2003 Mitsubishi Lancer

2 Answers

The fan in my 04 lancer ralliart starts running when I start the car and for about 30 secs after I shut it off. It never ran all the time until a month or so ago. What could be the problem?


The fan is controlled by a thermal "something" This item senses temprature and turns the fan(s) on and off as need be. IF it is on all of the time, Look for sensors in the water system, on the engine, usually up high... You can disconnect one at a time while shut down, and the fans should stop when you get the correct one. Other designs use a relay, but more failure happens at the thermal transducer...

Feb 13, 2011 | 2004 Mitsubishi Lancer

1 Answer

Engine vibration coming down to first gear


Sounds like outer carrier axel bearing problem. Safety hazard exist. It could lockdown and damage your brake components. Investigate soon. Change both CV axels when you replace the bearings. You will be money and time ahead.

May 22, 2017 | 2002 Mitsubishi Lancer

1 Answer

Can't seem to find the manual transmission gear box's oil drain plug on my Lancer 2005 4G13 engine?


I hate to point out the obvious - but are you sure it is a 4g13 engine? That is mitsubishi's 1.3l engine. Your profile has no info saying what country you are from - but I think all 2005 mitsubish lancer engines will be >1.3L
There is a 4g93 1.8l dohc engine.

Feb 20, 2010 | 2005 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...