Question about Lincoln Cars & Trucks

1 Answer

Brake lights work but tail lights don't work 91 LSC

Turn signals, brake lights, headlights work - tail lights do not work - not sure about front and side running lights.. Checked fuses - none blown. Instrument panel also doesn't light up when lights are on - but do light up as courtesy when door opens before ignition. . .

Posted by on

  • Colin Primo
    Colin Primo Oct 15, 2013

    Headlamp / Parking lights switch - for the tail lights.
    Dimmer switch - for the instrument cluster.
    Thanks Dennis !

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 170 Answers

Check and make sure you have the correct light bulb in the tail lamp fixture.

Posted on Oct 15, 2013

Testimonial: "Thanks for the input Kirk, guess I should have also stated that the bulbs (being dual filament) have been checked and are not the issue."

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dennymulford
  • 1055 Answers

SOURCE: Instrument cluster lights and tail lights went out

if its not the fuse then you have a bad headlight switch

Posted on Mar 13, 2009

lino_ph
  • 2 Answers

SOURCE: no instrument panel, tail or side lights

If the fuses are OK maybe there's a cut off between wires from fuses going to your load (panel lights, side lights); or try to check your power relay.

Posted on Oct 19, 2008

  • 160 Answers

SOURCE: 2 brake lights, turn signals not working 1999 plym. grand voyager

relay

Posted on Nov 11, 2008

SOURCE: Tail lights don't work on 1998 Chevy Silverado.

check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.

Posted on Feb 17, 2009

  • 1118 Answers

SOURCE: instrument panel lights,and tail lights do not work

Chk. fuse, there both on same curcit.

Posted on Apr 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights on Honda cbf 600abs is gone. But when I push brakes it's working


Check the fuse for the tail lights. Tail light and brake lights run on different wires. If the fuses are OK, look at the turn signal switch. If the front lights work, but the rear don't. TS switch. If neither work headlight switch. Could be grounds also.

Dec 21, 2014 | Cars & Trucks

2 Answers

Dash and tail lights not workjng brake and turn signal on passanger side not working


The dash and tail lights are on two different circuits, and the brake and turn signals are on different circuits, so at least 4 circuits total.
I would start at the headlight switch and check for power on the first two issues.

Jan 18, 2014 | 1990 Buick Century

1 Answer

I have a 1977 Ford E-150, when I turn on the headlights I have no turn signal lights and no brake lights. With the headlights off the turn signals work fine and the brake lights are fine. My idea is brake...


Well, the headlight switch would have no connection to the brake and turn signals. But you could have a ground problem somewhere.
I would want to trace the circuit from the brake switch to the tail lamps with the headlights on to verify.
And does it matter if you are using headlights or just parking lights.

Sep 27, 2013 | Ford E-150 Cars & Trucks

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

1994 Pontiac Grand am Tailights all work normaly except when the headlights are on and then they don't work at all?


Could be the headlight switch.
The switch has two sets of contacts for the parking lights, the park position and headlight position.
You may need to check the circuit at the switch to see if you are loosing power when the switch is moved from park to head.

Dec 23, 2012 | 1994 Pontiac Grand Am

1 Answer

Chevy S10. When my running lights are on everything works (except turn signals), front lights, tail lights brake lights. When I turn on my headlights turn signals still dont work everything comes on fine...


Check the grounds on your wiring.
If you have a trailer harness, make sure there are no shorts, or crusty connections

Good Luck chasing the gremlins

Oct 13, 2010 | 1996 Chevrolet K1500

2 Answers

1999 jeep grand cherokee - brake lights and turn signals working but Right tail light out with all other lights on--HELP??? My 1999 Grand Cherokee has no parking lights in the rear. The brake lights work...


I have taken my car to many shops to solve this problem. Long story short your tail light has a bad circut and entire lamp must be replaced. (Lamp cost approximate $130.00)

May 28, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Brake lights dont work, Turn Signals all goofy


First thing i would do is chg. the break light switch, and make sure to chk. all grounds around tailights, sometimes if there is a ground problem it will travel back thru the hot wire to get a ground, witch in turn makes everything go wackey.

Mar 10, 2009 | 2004 Chevrolet Tahoe

1 Answer

Only headlights work, 91 4dr EX


ok supaxang, could this solution be as simple as replace the 2 rear bulbs? The brake light and tail light (parking light) are the same bulb, 2 filaments, one for brakes, one for tail lights. If the the tail light filament burns out, the brake light will continue to work ok. It is quite possible that both tail lights burned out, and the brake light filaments are good and still working. Replace w/ bulb #2057. Let me know if this fixes it, if not, I'll keep working on it.

Oct 21, 2008 | 1991 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...