Question about Cars & Trucks

Open Question

I have a chevy optra 2005 manual trans.....shift lever got loose...what part do i need to change...Help

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 36 Answers

SOURCE: where is the thermostat located in the 2005 chevy

It is located on the left side of the engine(frt view) remove the rad hose then the 2 bolts holding the housing to the engine and you will find the thermostat.

Posted on Nov 11, 2010

Ad
  • 5370 Answers

SOURCE: Ford Explorer, gear shift lever

Take off the top cover of the steering colum, drop the colum down with the adjuster, take a small pair of vice grips, clamp it around the shifter indicator cable atachment. This will alow you to shift gears, (from rev to drive),no park. Just set the parking break, turn it off. Your key will not remove until you tie down the switch that is at the bottom of the shifter slot. Your shift lever will make it close when you put the truck in park. Then you will be able to remove the key. Click this link directly to see the internal shift lever parts,its adjustment and replacement:---- http://technoanswers.blogspot.com/2011/02/gear-shift-lever-adjustment-and.html ---------------- Also the bolts needs to be re-tightened to hold the lever,if they have got loose:--- helpmech_76.jpg
----------- This will help.Thanks.Helpmech.

Posted on Feb 12, 2011

dttech
  • 4803 Answers

SOURCE: i need a 2005 chevy

2005 Chevrolet Optra has four available engines: 1.4L (DOHC), 1.6L (L91), 1.8L (L79) and 2.0L (L34 GMDAT).

If you would like a belt routing diagram, it would be helpful if you would mention which of these engines your Optra is equipped with.

Posted on Jul 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the shift lever from 3 spd manual trans 1980 chevy el camino


Is it a side load or top shift lever off consel its bolts on same on top shift side shift different linkage on side to consel

May 06, 2017 | Cars & Trucks

1 Answer

Why does my 1997 chevy truck hard to shift from park when I apply the brake ? This problem started a month ago and is getting worst by the day, please help. .


You say nothing about Trans once going so must be OK linkage is mechanical have u visually inspect ed linkage that there is nothing binding fluid level of Trans there is a mechanical lever side of Trans hooked to linkage disconnect linkage 2 see if lever shifts freely there is an internal ratcheting arm that engages park in Trans may b at fault but it's internap drop Trans pan can see lever then change filter aND Trans fluid and new pan gasket don't over tighten pan bolts all I know hope it helps

Aug 18, 2015 | Cars & Trucks

2 Answers

I have a 1989 300zx manual trans. Will not shift in to reverse what coud be the problem


Sounds like linkage from shift lever to transmission or the bushings on the linkage points. A "sloppy" shift lever with similar bushing problems may be the problem.

Mar 23, 2015 | 1989 Nissan 300ZX

1 Answer

How to fix the linkage on the transmission on 2001 Lincoln navigator


First thing is to get safety glasses,block wheels securely !!...set emergency brake..,get a good flashlight.Disconnect negative battery cable...Some can wear inside the steering column,some can be a worn linkage cable ...The lever on the transmission located under vehicle Trans at lower part of trans,driver side can become loose or possibly damaged...First get under vehicle with safety glasses and observe operation of the lever where shift cable is mounted while assistant puts it in park...make sure the trans shift lever mounting nut is tight before shifting..If assistant can't get it in park use your hand and push forward on the linkage arm and it should go into park manually...If this is the problem you need to change shift cable...Some wear inside the column where steering wheel is mounted..If cab shifter feels very loose ..You will have to remove steering wheel and column cover to inspect."..The cable runs from trans to the steering column..Look between gas and brake pedal and verify cable coming up through floor board and runs to steering column...Double check shifter lever at trans is tight because it is mounted on a splined stud and it can strip the stud threads if it becomes loose..If loose remove lever and inspect splines for damage..Call dealer and make sure they have the part..Remove old cable from trans and put it in park with your hand...Remove and replace cable..Be sure lever inside cab and lever on the trans are both fully engaged into park while cable is removed before installing new cable....Attach new cable.....

Oct 16, 2014 | 2001 Lincoln Navigator

1 Answer

Have chevy optra 2005 manual trans. Gear shifter became loose


remove the boot around the shifter and tighten the linkage bolts.

Oct 15, 2013 | 2009 Chevrolet Optra 1.6

1 Answer

1999 chevy cavalier transmission won't shift into


1999 cavelier manual trans: My son was shifting his manual trans really rough (ramming through the gears to try to beat someone out at a light) and ended up not being able to put it into anything but 3 and 4 (straight up and down). We noticed that the shifter cable, that actuates the position of the arm on the transmission, had pulled away from a "c" clip and was not held into place about 8-10 inches down the cable away from the trans. The cable needs to be secured into that clip in order to let the wire inside move the trans. lever to shift. Otherwise you will be stuck on what ever "rail" your trans is on at the time of disconnection. It would be the first thing that I would check.

Nov 22, 2011 | 1999 Chevrolet Cavalier

1 Answer

My 2004 chevy optra won't shift out of park. The


I recently changed the 10 amp fuse inside the car, 4th fuse down from the far left, lablled cluster in manual and when I took it out I couldn't shift out of Park! When I put in a new one it was ok again!
Hope this helps

Jul 10, 2010 | Chevrolet Aveo Cars & Trucks

2 Answers

2005 auto Jeep Wrangler-56 K miles-bought brand new


Trans fluid is full right? If it's full, when was the last time trans oil was changed? NEVER go by manufacturers interval they couldn't care less if your trans dies. Change fluid every 25K. It's way cheaper than a new unit. If you read manual, "severe service" is just about anything more than sitting in your garage!!
About slipping...if unit is full and change does not help, you need a rebuild. Only trust a reputable shop to do this. Ask people you know before turning it over to just anyone! It's a machine...sometimes even with the best care they break. If it broke get the best people to fix it.

Mar 09, 2009 | 2005 Jeep Wrangler

1 Answer

2004 chevy optra belt


Here is AutoZone's manual page showing the routing.

Jan 12, 2009 | 2005 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...