Question about 1994 Ford Taurus

1 Answer

Engine mount replacement

I have a 1994 taurus, v6 3.0, engine jumps on acceleration. Possible engine mount needs replaced? How many are there and how do I find a diagram to assist?

Posted by on

  • rodcathy Apr 28, 2009

    Thank you for the good advice!

  • Anonymous Mar 22, 2014

    3.0 V6 engine mount diagram

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

There are two liquid filled and a trans mount. You need to found out which way the motor jumps if it jumps back to the fire wall I would change the two liquid fill. They are located looking at the engine on the pulley side left and right bolted to A-frame you can change one at a time. Unbolt one and jack motor with a floor jack and board just lift enough to drop it in and out. It's tough I know I did it before but it can be done. And do the same for the other. Trans mounted one never needs replaced. Just make sure the mounts are bad cause front wheel drive motors usally move but if its moving more than 2"-4" then replace them.

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 toyota camry that jumps when I put it in drive, and if when I try to accelerate sometimes it jumps. I dont know if its the motor mount or transmission. Do you know what it could be?


I would suggest you check & possibly replace all
the engine & transaxle mounts, based on the age of the car

Next you have to separate an engine performance issue,
from a possible trans issue

I suspect you have a mount problem & a possible sensor
problem or something that effects the trans shifting strategy.

Jun 05, 2012 | 1996 Toyota Corolla

1 Answer

How can I tell if the mechanic actually replaced my motor mounts? where are they on a 2001 Ford Taurus? I found the one on the top bone mount. Where are the other two? Thanks.


They are liquid filled,an the bottom,bolted to the subframe,should be able to see them both,and if he did the engine shouldn't jump around anymore.

Apr 10, 2011 | 2001 Ford Taurus

1 Answer

The front wheels and steerting wheel of my 1994 ford escort shake when accelerating and braking.... could you tell me what the problem might be ?


Probably one or more bad motor or transmission mounts. You can brake torque the engine in reverse and drive, if the engine rocks violently in either step those mounts need replaced.

Apr 06, 2011 | 1994 Ford Escort

1 Answer

Where is the EGR pressuure sensor at. Need to replace it.


Ford Taurus SES 3.0 L 6-cylinder
EGR valve are directly behind the intake manifold.

a1de76f.gif

I listen from Taurus owners that just had the same problem (EGR insufficient and EGR excessive) and they replaced the EGR valve and the 4 oxygen sensors (if you do this use Ford sensors). This didn't fix the problem; then changed the Vacuum Regulator Solenoid and a tube mounted sensor part numbers F63Z-9J459-AA, and 4U7Z-9J460-AA. this fixed my check engine light and code issues, as well as it stopped idling so high that it caused the trans to jump into gear. It sometimes jumped so hard that he thought he had a broken motor mount.

Good luck (remember rated this).

May 27, 2010 | 2000 Ford Taurus

1 Answer

Shifts hard and jerks under hard acceleration.


thottle positioning sensor? if trans has overdrive could be a lock up piece, dont remember name of it. there is a lucas oil product that might help. if it is the overdrive.

Nov 05, 2009 | 1994 Ford Taurus

1 Answer

Car shudders on acceleration


I'd check the motor mounts. Shuddering upon acceleration indicates movement of the engine inside the compartment. Best of luck.
Greg

May 20, 2009 | 1994 Dodge Spirit

1 Answer

Engine cuts out


For the sticking accelerator you can try spraying some penetrating oil down the tube the cable runs through with the little plastic straw tape to the side of the can. Also spray some on the the accelerator pivot points inside the car.
On some Ford vehicles there are two fuel filters.
The one you see in the engine compartment and another mounted on the frame that is suppose to last the life of the car, so it isn't mentioned in the owners manuel. Call a Ford dealer and ask if your car came with one, if it did I would change it even if they don't think it needs to be. It's a cartridge filter and cost about $10.
After that I would do a fuel pressure test and a fuel out-put test that is perform with the car running.

Jan 07, 2009 | 1994 Ford Taurus

3 Answers

1994 Nissan Altima shakes while idling


Broken or worn out engine mounts will cause allot of engine vibration in drive at idle, reverse also, change all 4 the mounts, not just the 2 broken ones. As far as slow acceleration no mounts will not cause that, Have you reached the 100,000 mile recommended tune up? have you ever replaced the fuel filter, this is required every 30,000, let me know.

Nov 26, 2008 | 1994 Nissan Altima

Not finding what you are looking for?
1994 Ford Taurus Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...