Question about 1993 GMC Sonoma Club
The problem is in the start circuit if the starter won't engage from the key. From battery to ignition switch to neutral park safety switch to starter relay to starter solenoid to starter to ground and back to battery-lights come on so switch is good, next check the neutral safety switch for power in and power out.
Once you get the start circuit working so starter engages from the key, then you can address the ignition circuit for possible no spark.
Posted on Oct 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
bottom rear of engine on the passenger side, the starter is serviced from under the car. it is held to the engine block with two bolts, then u must remove the battery cable and starter solenoid wiring as well, always disconnect the battery before doing any work on the starter.
Posted on May 19, 2009
2.2L Engine remove protective shields as needed then remove front exhaust pipe. Remove the brace from the engine to the clutch housing, then disconnect starter wiring. 4.3L Engine 2 wheel drive just remove the right front tire and you will have access to the wiring. 4.3L Engine 4 wheel drive you must remove the differential carrier shield if equipped then remove the starter bolts and rotate the starter to get access to the wiring. Good Luck.
Posted on Jun 15, 2009
The ignition module in the distributor is what you need to give the engine spark to the plugs. It senses signals from the PCM to regulate the spark control and this item is the part that took over the old style point & condensor type ignitions. It is time for a new one in your truck
Posted on Apr 17, 2010
Hello jwrose909; My name is Roger and I will help you. The fire order on your truck is 1-6-5-4-3-2. I also attached a picture for you. Should you need further help please just ask. Please rate the answer you received. This way I know it was helpful. Thank You for using Fix Ya. Roger
Posted on May 18, 2010
Tips for a great answer:
Dec 12, 2015 | 1991 GMC Sonoma
Mar 08, 2014 | GMC Sonoma Cars & Trucks
Oct 31, 2013 | 2004 GMC Sonoma
Oct 14, 2010 | 1994 GMC Sonoma
Sep 30, 2010 | 1997 GMC Sonoma
Mar 08, 2010 | 1993 GMC Sonoma Club
Feb 13, 2009 | 1995 GMC Sonoma
May 15, 2014 | 1993 GMC Sonoma Club
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: