Question about Cars & Trucks
Dumb question...have you checked the fuses? Sounds like either that or some wires may have gotten loose.
Posted on Oct 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
chilton profellional power accessory and wiring diagrams manual 1968-73pps 666-674. I have it right in front of me. but don't have means of transmitting. any ideas? email@example.com
Posted on May 21, 2009
check the outputs on the multi function switch (t/s switch) the brake lights and flashers all go threw this switch try to wiggle the flasher button if the lights start to work then the switch is bad to replace switch remove bottom cover by pedals if it has one bottom cover on steering colum has i beleave 4 screws that hold it on, the tilt colum lever unthreads and the cover will come off the upper colum just clips on you will have to remove the key tumbler to get it off . you need to disconnect the battery at this point and block the wheels. to get tumbler out put key in and turn to run postion there is a small silver button that pushes in with small screwdriver once its pushed in use the key to pull tumbler out the top cover will now come off you will probably have to tilt colum down and shift to 1 to get cover off there are 2 torx head screws that hold switch on plug new switch in and reconnect battery to test lights unhook battery again and reassemble please let me know how you make out
Posted on May 22, 2009
Before going ahead and spending money on a new module, test it first. The module is located under the steering column. You'll find a Brown wire on one of the connectors (i just looked at a wire diagram). Do no disconnect anything. Back probe the brown wire, which is the power feed to your park lights. With the lights off, there should be 0 volts on you voltmeter. Turn the park lamps on, There should be 12V. If there is not 12V, disconnect the connector and try to check voltage at the pin that feeds to the brown wire, if still not 12V, replace the module. If you do get 12V, then module is ok, find where the 12v is being dropped before making it to the lamps.
Posted on Aug 09, 2009
Tips for a great answer:
Sep 26, 2014 | 1991 Toyota Land Cruiser
May 09, 2014 | 1991 Pontiac Firebird
Mar 18, 2014 | 1996 Pontiac Firebird
Feb 09, 2013 | 1991 Chevrolet C/K 2500
Mar 05, 2011 | 1991 Chevrolet Cavalier
May 25, 2017 | 1991 Pontiac Firebird
Jul 14, 2009 | 1991 Pontiac Firebird
Jul 12, 2009 | 1991 Pontiac Firebird
Jun 17, 2009 | 2000 Pontiac Firebird
Sep 24, 2008 | 1999 GMC Yukon
52 people viewed this question
Usually answered in minutes!