Question about Acura Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Acura tl brake replacement
The Brembos that come on Type S/Manual models wear fast. I've changed them at 20,000 miles. They are expensive also.
Non-Type S/Manual models I have seen go 80,000 miles. The biggest factor on brake wear is how the vehicle is driven.
At 50,000 miles I would have them inspected. Depending on where you go, make sure you get an accurate measurement of both pads (inboard and outboard). 2mm is the service limit and about that time the indicators start making noise, but not always. Most indepent shops are going to sell you brake pads at 4mm. That's another 10,000 miles at least you could have driven on them.
Never replace just the brake pads, resurface or replace the rotors. The uneven surfaces of the rotor will cause your new pads to wear incorrectly and possibly cause brake noise. Most aftermarket pads will cause a squeel.
Posted on Sep 21, 2008
if it's a tail light housing that broke, and not the bulb that simply burnt out, i'm afraid your solution isn't that simple. you have to at least loosen the bumper on the side that the tail light need be replaced. which will include removing the mud flap on that side of the car, removing all the clips on the bottom of the bumper, and removing the two bolts behind the quarter sized plastic covers just inside the trunk lid.
Posted on Dec 17, 2008
you need a 6 inch extension, short 3/8 ratchet, 5/8 plug socket, 3/8 swivel "u" joint, (sold at sears) 8mm 1/4 drive socket deep well and 1/4 inch ratchet.
find the coil packs (6 total, three in each head.)
remove the two retaining nuts holding each coil pack using 1/4 8mm socket and ratchet.
twist the pack to break the sticking boot below.
pull up (be careful to not rip the boots however it may still happen but rare.)
remove coil packs, the rear is a little more difficult with the intake.
use 6" extension and u joint and ratchet to remove plugs and replace.
reverse order to assemble. Good luck, and hoped this helped.
Posted on Jan 04, 2009
SOURCE: ACURA 2204 TL
I UPGRADE IT MY TL NON TYPE S ...TO THE O.E BREMBO KIT....TOGETHER WITH THE ROTORS AND BRAND NEW ABS SENSORS.......WHY IS THE ABS ,VSA, ABD BRAKE LIGHT ON??MY ACURA IS
Posted on Mar 12, 2009
Tips for a great answer:
Feb 07, 2016 | 2005 Acura TL
Feb 07, 2016 | 2005 Acura TL Automatic
Jul 04, 2014 | 2005 Acura TL
Sep 17, 2012 | 1996 Acura TL Series
Jan 21, 2011 | 1999 Acura TL
Aug 18, 2010 | 2005 Acura TL
Dec 31, 2009 | 2000 Acura TL
May 25, 2009 | 1996 Acura TL Series
Sep 18, 2017 | Acura Cars & Trucks
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: