Question about Cars & Trucks

Open Question

I have a 2000 Chevrolet 3500 truck with a 5.7 liter engine. I replaced the engine with a new remanufactured one. I attempt to start it, it turned over for a brief moment and lost all power. I discovered that the small wire starter wire was touching the starter shield. It shorted a 40 amp fuse in the fuse box under the hood. I replaced the fuse, but the truck will not start. I connected my scanner and it showed a code of p0335, which indicated that the crankshaft sensor was bad. I replaced the sensor and the truck still will not start. I have replaced the distributor and still no success. I have voltage at one terminal at the distributor when I turn on the switch, but I have no fire at the spark plugs. What else is there that cause it not to start.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: H2 Hummer

Today 11-12-08 my 2003 H2 Hummer would not start. Checked battery it ischarged. Cables tight. Tried to start with portable booster pak. No go. Tridto jump start with my wife's Suburban. Still no go.
When I turn the switch I hear a single click and that is it. No engine turning over. While trying to start with key the headlights go out. Out of ideas, Will take to Chevy garage in am. Will post solution.

Posted on Nov 13, 2008

GARYca
  • 672 Answers

SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.

there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks

Posted on Aug 11, 2009

  • 1757 Answers

SOURCE: diagram of dodge dakota 1988 3.9 liter firing

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway.


The Dodge 3.9L (238 cubic inch) Engine from 1988 thru 1996 is the same:

Firing Order:
1-6-5-4-3-2

Cylinders:
(back of engine)
6........5
4........3
2........1
(front of engine)

Distributor:
(back)
........3.....(+)-screw
..2
..................4
.1
.................5
(+)......6
(front)

Rotation Direction:
CLOCKWIZE

Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...

Posted on Mar 10, 2010

  • 3 Answers

SOURCE: 2003 dodge caravan won't start

My 2003 dodge caravan would not start after driving about 1/2 hour. I stopped for coffee and when got back in to start it started I switched gears and it stalled. I tried to start again switched gears then it started but only for 2 sec. No clicking, no cranking sound just would not start but battery functions were great. Spent 2 days with a mechanic who could not resolve so sent to Dodge. After a day of putting wires back and checking out the problem they said it was the computer. Said that it was bad and could be replaced at no charge due to malfunction. Yes, it worked fine afterwards no more problems. They also said that some of the computers are found to be defective like this one so I hope this helps you in the right choice to have the dealer check it out if you are unable to get a computer reading and there is no obvious short in the system. Free sounded very good but as you know there is no such thing as really free as they got me for other things $350 worth. ouch!

Posted on Jul 24, 2010

  • 1 Answer

SOURCE: 1998 chevrolet truck 5.7 liter code p1345 whats it

i change darn near every sensor and 3 fuel pump on my "1998 chevy tahoe sense last 5yrs.i own it,and the last fuel pump on it two days ago and it just turns over hard,but won't crank.

Posted on Dec 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For fuel pump on 2000 chevy truck 3500 need to check wiring on the harness


About 232,000 results (0.81 seconds) Search Results

    How to Install New GM Wire Harness on Fuel Pump Module ...

    ? 3:10
    https://www.youtube.com/watch?v=FffdzqknP3k
    Apr 20, 2012 - Uploaded by Airtex Pumps
    This video is about how to install a new Airtex fuel pump module into ... When included the wiring harness ...

    How to Install Fuel Pump E3947M in 1997-2000 Chevrolet ...

    ? 5:53
    https://www.youtube.com/watch?v=9LLLRVnItbI
    Apr 20, 2012 - Uploaded by Airtex Pumps
    Applications: 2000-97 CHEVROLET/GMC C, K 1, 2, 3 TRUCK 262 ... This will give you the extra height ...

    How to test an electric fuel pump - YouTube

    ? 13:54
    https://www.youtube.com/watch?v=Q3ZiTsKCdO8
    Feb 3, 2012 - Uploaded by ScannerDanner
    2001 GMC 3500 8.1L engine with no fuel pressure. In this video I am showing how to test the fuel pump ...

    2000 Chevy 1500 4WD. Replaced fuel pump, no power ...




Jan 22, 2016 | Cars & Trucks

1 Answer

How to program chevy truck after new key cylinder has been chged.


The engine stops because the computer does not recognize the new key. You must find a way to get the truck and technician with right equipment in the same place ( usually the dealership service ). I do not know of any alternative.

Mar 26, 2014 | 2000 Chevrolet 3500

1 Answer

Engine online help


How did you set the timing?

Feb 17, 2014 | Chevrolet Cars & Trucks

1 Answer

Ignition coil


Check your fuel pressure it should be 60-66 psi with the key on and engine off.If its not within these specs replace the fuel pump and filter.

Jan 29, 2013 | 2000 Chevrolet 3500

1 Answer

This morning my 2000 Z71 Silverado 1500 had trouble starting. It took about 3 attempts, then started sputtered and die. On the 4th attempt I pumped the gas, held the engine rev about 3500 then it was fine....


May be a problem with the mass air flow sensor located on the air cleaner assembly. Dust particles sometimes collect on the very small resistors on the MAF Sensor. Buy some electronic dust spray you use for computers and spray the resistors. Be carefull not to touch them, they are very sensitive. Thanks.

Apr 18, 2011 | 2000 Chevrolet Silverado 1500

1 Answer

My 2000 chevy 3500 5.7 liter wont start up it cranks but won't start any solutions


NO START UP CAN BE MANY THINGS LIKE BAD SPARK PLUGS - FAULTY FUEL PUMP - DAMAGE OR BAD IGNITION COMPONENTS - FAULT IN FUEL INJECTORS CHECK FUSE.A BROKEN OR DISCONNECTED IGNITION COIL WIRE.TO SAVE YOU TIME HAVE THE TRUCK SCANNED.

Feb 13, 2010 | 2000 Chevrolet 3500

1 Answer

Chevy ''Service Engine Soon'' light keeps coming on


take about 20 minutes if you have to tools handy. You have 4 02 sensors so be sure to have the tech tell you which one.

Nov 26, 2009 | 2000 Chevrolet 3500

1 Answer

The location of the cam sensor on a 1999 chevy 3500 5 7 liter


CAM SENSOR IS IN THE DISTRIBUTOR ON THE V6 ENGINE.ON V8 ENGINE CAM SENSOR ON THE ENGINE BLOCK.

Jul 06, 2009 | 1999 Chevrolet C2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...