Question about 1997 Ford Expedition

1 Answer

No brake lights i changed the bulbs and fuse and still no brake lights what do i do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

First make sure the sockets are ok use a 12-volt test light and also check the brake light switch on the top of the brake pedal itself and make sure the battery post are clean use a little baking soda and water to clean them off and make sure the fuselike plugs are clean the plugs on the same side of the battery coming out from the fire wall to the battery

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the brake lights on my mercury sable. all the other lights work fine


Does your car have the `lamp out'indicator system? It's more complicated.
My manual shows fuse #28 , a 15 amp fuse powers the brake bulbs.Is this the one you changed?
A bulb can be out for a long time and you don't notice it,then the other burns out and you think they both went out at the same time,but they might not have,see?
So check the bulbs and make sure you got that brake switch installed correctly. don-ohio (:^)

Jan 22, 2013 | 2000 Mercury Sable

1 Answer

Head lights work brake lights don't, have changed brake switch and bulbs and checked fuses


When you say you checked the fuse, are you getting power in and out of it and the brake light switch ?

Jan 04, 2013 | 2003 Jeep Liberty

1 Answer

Brake light does not go on, fuse ok new bulbs stil no brake light when brakes are applied


check both fuse boxs if ok check the break light switch on stearing colum may be unpluged or bad

Jan 29, 2012 | 2000 GMC Sierra

2 Answers

My additional brake light is not working i have tested the brake unit and that works is there a seperate fuse for this or is it all on one fuse for all the brake lights


The third or High Mounted Brake Light runs straight off the brake light switch on the brake pedal arm. You say you tested the "brake unit"? I assume you mean the third brake light assembly, and if you get power there when someone steps on the brake pedal, then the bulbs are bad.

The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!

Aug 28, 2011 | 2002 Ford SVT Focus

2 Answers

Need to know which fuse control my brake lights. Light bulbs are fine but when i press the brakes the lights dont come on.


change the brake light fuses on ur chrysler 300. also get it checked at a dealer to spot any other issue, if any.

Dec 22, 2010 | 2008 Chrysler Aspen

2 Answers

Brake lights don't work


This sounds like a bad brake light switch, this switch is located on the bracket that holds brake pedal,you can test for power at switch,also if you remove connector and jump terminals with a wire and see if lights lite, if lights light then switch is bad,

May 27, 2010 | 2006 Hyundai Sonata

1 Answer

No brake lights changed bulbs and fuses


Does the brake light in the rear window work? If so, the brake light switch is good. Running lights all work?

May 24, 2010 | 1998 Toyota Camry

2 Answers

Brake lights not working on 2003 E 350


Have you checked the fuse for the brake lights and have you checked the brake light switch.
The brake light switch is directly above your foot when it is placed on the brake pedal.

Sep 07, 2009 | 2002 Ford E350

1 Answer

ABS light, gear won't change


Sounds like he may have blown the brake light fuse while messing with the bulb. Make sure the correct bulb is installed. It should be a double filament bulb not a single.The wrong bulb will blow the fuse.
The shift lock solenoid uses the brake light switch to unlock.
The ABS code will be for the brake light system and will clear itself when the power is restored to the brake light switch.

Apr 05, 2009 | 2008 Toyota Sienna

Not finding what you are looking for?
1997 Ford Expedition Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...