Question about 2010 Jeep Liberty

Open Question

Where is the air blend door actuator on a 2010 Jeep Liberty

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2002 Jeep Liberty 3.7L air conditioner bearing replacement

did you check the recall items for this?

Posted on Jun 28, 2008

  • 958 Answers

SOURCE: jeep liberty 2002 air conditioning

please elaborate, does your inside fan still works? does your compressor clutch kicks in?...would you know if you have refrigerant in your system? if you can trace the hose from the compressor to the evaporator, you can see a plastic cap normally blue with a big letter "L" at the top, then it is the low side fitting, you can remove the cap and get a pin and press the pin at the center( be carefull, refrigerant might be present). if there is none, then you have a leak. u lost all of your refrigerant that is why the ac did not work. if you do have a big burst of gas as you press it, then it is not a refrigerant problem,
a lot more to be tackle as you help me diagnose your problem.

tnx

drcool

pls rate me..

Posted on Jul 21, 2008

  • 3 Answers

SOURCE: How to change heater blend doors on 2003 Jeep Grand Cherokee

go to wjjeeps.com there is several pictures and step by step instructions.

Posted on Dec 29, 2008

  • 323 Answers

SOURCE: Blower only pushes air through defroster. 96 Jeep GC

There is a vacuum leak under the hood. On the 4.0 liter it is usually at the intake manifold near the brake booster. The 90 degree vacuum fitting pops off of the nipple of the intake. On the 5.2 liter the vacuum leak is usually near the battery where acid corrodes through the line as it passes near the battery box to the reservoir under the box.

Posted on Jul 17, 2009

  • 1 Answer

SOURCE: blend door actuator needs replacing does the

no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Posted on Nov 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Jeep Liberty and the heater only blows like warm air. I have replaced the thermostat and flushed the heater core and still no change. What could be wrong?


Blend door may be sticking thus mixing too much cold air with the hot. Bad blend door actuator, vacuum leak or blend door seal is bad.

Feb 19, 2015 | Jeep Cars & Trucks

1 Answer

How do i fix a stuck blend door on 2010 dodge nitro?


I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it out with one of the other actuators. The blend door actuator is interchangeable with the actuators for the mode-air doors and the recirculation-air door.

Disconnect and isolate the negative battery cable.

If equipped, remove the silencer from below the driver side of the instrument panel.

Disconnect the wire harness connector from the blend door actuator located on the driver side of the air distribution housing.

Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the actuator

Feb 17, 2015 | 2010 Dodge Nitro

1 Answer

Why does my 2010 Jeep Liberty just blows cold air?


Blend door is not moving to open to the heater core. Coud be that the cable is not connected to the dash lever but if it's vacuum actuated the vacuum line could be off. Check that your getting vacuum.

Dec 01, 2014 | 2010 Jeep Liberty

1 Answer

2002 jeep liberty


there is a blend door actuator under the dash that controls air flow.
This would need to be changed

Dec 10, 2013 | Mercury Cougar Cars & Trucks

1 Answer

Air Condtioner Partially Working Jeep Liberty 2010


Usually a sign of a stuck blend door under the dash.
Could be a faulty blend door actuator, or the main controller.
You may need a shop manual to make the repairs since this is generally beyond the abilities of a DIY repair book.

Jul 16, 2013 | 2010 Jeep Liberty

2 Answers

Where is the blower motor relay located on a 2010 jeep liberty


on all speeds, is it dead sounding or only no air flow???
wow no symptoms posted only this goose chase deal.

use the scan tool yet? see all DTC errors.
2008 cars can report most cause of lost power etc,
not scanning, invites expensive gue$$ing.!!

HVAC 101: (
gdoes the motor have 12vdc on high? at connector to it>?
on all speed's (now that is a KEY FACT there)

  1. defeat air bag first or die , fiddling these parts.
  2. do the HVAC calibration yet? per FSM.
  3. scan it yet ,if not you will guess wrong. I promise,
  4. i have to stop my online page ,is missing the wiring sections.

calibrate damper:
Use this procedure to ensure that the A/C-heater control is correctly calibrated to the blend door actuator. If the calibration is not correct, the heating-A/C system may experience a condition where full heating or cooling capabilities cannot be obtained.

Many steps can not be done with out a real jeep scan system.
sorry, cant.

Apr 16, 2013 | 2010 Jeep Liberty

1 Answer

2005 jeep liberty sport manual


The blend door actuator will not be the problem, the blend door will be stuck or broken, common problem.

Jul 27, 2012 | Jeep Liberty Cars & Trucks

1 Answer

Air blend door jeep liberty 2010


My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely seized. There are 4 blend air doors on this liberty, 2 control the heat/ac and 2 control the air flow.
there is no access to them from the drivers side and the passanger side looks like I have to cut into the air box to get to them.

Jan 03, 2012 | 2010 Jeep Liberty

2 Answers

I have a 2002 Jeep Liberty Limited, 3.7 L motor. The heater will not blow hot air. The A/C and fan work well. When I turn the temperature dial to hot, there is only cold air coming out. Can you assist me?


Jeeps are notorious for having broken temperature control (Blend Air) doors. A malfunctioning Blend Air Door actuator probably caused it to break. The dash will have to be removed to replacethe door and the door actuator.

Jan 16, 2011 | 2002 Jeep Liberty

Not finding what you are looking for?
2010 Jeep Liberty Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...