Question about Dodge Cars & Trucks

Open Question

Troubleshoot codes p0701

1999 dodge ram P0701 code. idleing rough. poor gas mileage

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 93 Answers

SOURCE: poor gas mileage

have coolant temp sensor checked as incorrect readings will affect running of vechile.

Posted on Mar 09, 2009

Ad
motor1258
  • 6674 Answers

SOURCE: rough idle and misfire on ram truck

Change cam sensor & erase codes.( disconnect battery for a minute or so after.) 340 & 1391 refer to cam sensor problem, and all other 300 codes are cylinder misfires that should disappear when cam sensor fixed.

Posted on Jul 09, 2009

  • 226 Answers

SOURCE: Idles high-vacuume hose?

check the gasket between the intake and the throttle body base. Thet tear and it makes a leak there. Lee

Posted on Nov 07, 2009

  • 1 Answer

SOURCE: 2006 dodge ram hemi with gas cap light on and smell of gas after

my dealer says you shouldnt use aftermarket gas caps. but i am having the same problem...did you get any results?

Posted on Mar 08, 2010

SOURCE: 1998 dodge ram error code 1494 check engine light

Check all tubing and junctions for leaks in the fuel evaporation control system. The ECU has detected an issue with intake manifold pressure and is indicating that fuel vapour recovery system is perhaps to blame. Sometimes this can be connected to a fault in the manifold differential pressure circuit which lies on the vacuum line leading to the EGR valve. Also quickly check that the EGR (exhaust gas recirculation) valve is OK by connecting and reconnecting its vacuum line and listening to engine note changes. No engine note change indicates the EGR is probably jammed shut with exhaust crud and needs a general clean up. Sometime these codes detect the symptom and not the cause so you just have to work your way back and eliminate what it might be.

Posted on May 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0701 and p0704


Unfortunately the 0700 series of numbers relate to the transmission. Code ( P0701) is pushed by 1- Open or short transmission control system circuit. 2 - Poor transmission control system electrical connection. 3 - Check powers and grounds to Transmission Control Module (TCM). Code P0704 is pushed by 1- Faulty Clutch Switch.
2 - Misadjusted Clutch Switch. 3 - Clutch Switch harness is open or shorted. 3 - Clutch Switch circuit poor electrical connection. 4 - Faulty Engine Control Module (ECM). But I'm guessing you have an automatic trans. right. If so I would look at the (DTR) digital transmission range sensor.

Nov 26, 2013 | 2004 Ford Expedition

1 Answer

Poor acceleration


Check your spark plugs.

Oct 02, 2013 | Nissan Cars & Trucks

1 Answer

I have a 1998 dodge ram 4x4 with a 5.9, engine has been idleing rough, it idles fine for about 30 seconds then runs rough, almost to stalling, also the gas mileage is like 3 miles to the gallon. i had it...


If the speed sensor code is coming up change it. the sensor went out on my truck and it would die when i was slowing down and hit the clutch to downshift

Jan 26, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

Dodge ram 1500 5.9 idles rough and stales out


This truck has problems with the cover inside intake leaking vacuum and causing rough idle and oil usage , its hard to say what your problem is with out testing, have you had the check engine light scanned for codes? what year is this dodge?these also had intake leak problems. try starting the engine and let it idle and then with some carburator cleaner spray around intake gasket and see if idle changes if it does then you have a intake gasket leak, another problem may be a leaking injector, try some sea foam in the gas tank and run a half tank of gas and see if that helps, otherwise a fuel injection system cleaning would be the way to go but this is only if its an injector problem, if this truck is 1996 or newwer have the computer scanned at an auto parts store for any codes. if there are codes let me know what they are even list the code and #. good day

Aug 27, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

Correct fuel pressure in lbs for a 2000 dodge durango 4x4 5.9 ltr engine


The specification is 44-54 Psi. The manufacturer lists the specification with the engine idling.

Also, if fuel pressure is the cause of your problem, there will also be other indicators....

First, it will most likely set "lean oxygen sensor" codes in your computer. Also, your fuel trims will be skewed - I would recommend taking a look at that as well. Skewed fuel trims, poor fuel mileage and hesitation, loss of power, can also be caused by a dirty or defective mass air flow sensor.
Another possible cause of poor fuel mileage and poor acceleration is a restricted exhaust.(Bent or crushed tail pipe or a clogged catalytic converter.)

Jan 13, 2012 | Dodge Cars & Trucks

1 Answer

P0068 on a 2006 Dodge Ram 1500 SLT. Rough "hunting" for idle. Momentary lag/loss of power from a stop. Random RPM changes while at a constant speed. Sometimes it feels like it drops out of gear...


P0068 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of power
- Engine rough idle Possible causes - Large vacuum leak
- Leaking air duct system
- Mass Air Flow (MAF) poor electrcial connection
- Manifold Absolute Pressure (MAP) poor electrcial connection
- Faulty Mass Air Flow (MAF) sensor
- Faulty Manifold Absolute Pressure (MAP) sensor
- TP sensor not seated properly.
- Faulty Throttle Position (TP) sensor.
- Dirty throttle body
When is the code detected? The Powertrain Control Module (PCM) monitors operation rationality check by comparing sensed throttle position to mass air flow readings
P0068 DODGE Description The Powertrain Control Module (PCM) monitors a vehicle operation rationality check by comparing Throttle Position (TP) to Mass Air Flow (MAF) readings. If, during a self-test, the comparison of the TP sensor and MAF sensor readings are not consistent with the calibrated load values, the test fails and a diagnostic trouble code is stored in continuous memory.

Jul 10, 2011 | Dodge Ram 1500 Cars & Trucks

2 Answers

Very rough idle, check engine light on, poor gas mileage


change your air filter and also change your wireing and spark plugs

Jan 11, 2010 | 2002 GMC Sierra 1500

1 Answer

Engine runing rough


This code is most likely not related to the problem, it sounds like you may have picked up some contaminated gasoline, maybe has water in it or other like dirt.

May 20, 2009 | 2003 Dodge Ram Maxi

1 Answer

2005 silverado..5.3...motor idle rough.. getting 3 codes


p0171 and o0174 is lean replace intake gasket they will be a teal color,the old ones are red. i work for chevrolet.this is a common problem

Feb 11, 2009 | 2005 Chevrolet Silverado

1 Answer

Flat sopt durning acceleration


Perhaps a trouble code scan would be beneficial, so that you get the right part the first time. Could be a few things, so why gamble, spend $20-$30 have it scanned, and possibly save $100's

Aug 17, 2008 | 1989 Dodge Ram 50

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...