Question about 2003 Buick Century
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replace the rear view mirror
Gently tap the base of the mount upwards. I just replaced mine and I thought there was a cover over the winshield mount, turns out it is just pushed on to the wedge that is mounted to the windshield. Good Luck, webree
Posted on Nov 10, 2008
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
yes you will you will have to take side trims and sill panel off get a 10 mm ready and take the bolts out the tail liaghts should come out the license lamps have screws in them and if you looka t them but you should be able to twist bulbs and pull them out / Please rate my response thank you very much
Posted on Jan 30, 2009
MAKE SURE PARKING BRAKE IS OFF.BUT IF MASTER CYLINDER PISTON NOT RETURNING.IT CAUSE BRAKES TO DRAG.ALSO RESTRICTED BRAKE LINE AND HOSE.ALSO WHEEL CYLINDERS OR CALIPERS STICKING.
Posted on Aug 01, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Aug 30, 2015 | 2003 Buick Century
Jul 19, 2015 | 2004 Buick Century
Aug 29, 2013 | 2004 Buick Century
May 19, 2013 | 2004 Buick Century
Jan 19, 2013 | 1998 Buick Century
Oct 10, 2012 | 2004 Buick Century
May 31, 2012 | 1994 Buick Century
Oct 01, 2016 | 2003 Buick Century
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: