Question about Cars & Trucks

Open Question

Opel monza 1993 model how do u strip and assemble left front wheel bearings

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 24 Answers

SOURCE: replace front wheel bearings

The bearings in your car are pressed into a hub. If the part is available as an assembly, it can be replaced that way. Generally on a front drive car:
Remove wheels and brake calipers
If it is pressed in: remove the rotors, disconnect the drive shafts and remove the steering knuckle. Then the old bearing is pressed out and the new one pressed in with a machine shop press. If the bearing is part of the hub, that will be unbolted and the new one swapped.

On a scale of 1-10 difficulty, Id rate it a strong 7

Posted on Jun 20, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Repair front wheel bearing


I'm thinking they were hub Assembly's ...
If that's the case then remove tire
Axle nut
Caliper bracket, rotor
Andfew bolts holding hub on...

Sep 03, 2014 | 1993 Ford Crown Victoria

2 Answers

Hi i need the torque settings on the opel astra 1800ie 1995, head settings, fly wheel and bearing settings


torquespecs.com if not there there are several sites like that one that list any car u can dream of.good luck

Feb 04, 2011 | Isuzu Pickup Cars & Trucks

1 Answer

Noise coming right front wheel. I assume that it is the wheel bearing. My question is: are there an inner -AND- outer bearing. Also, how dificult are they to replace. 1993 Toyota Previa front disc brakes....


whole assembly has to be changed, the bearing is one non-dissasemblable unit, it has to be pressed out and in. best done by someone who has the right tools.

Jun 30, 2010 | 1993 Toyota Previa

1 Answer

2004 silverado 4x4 2500 left front wheel bearing


  1. Raise and support the vehicle.
  2. Remove or disconnect the following:

    Tire and wheel assembly Caliper and rotor Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly on four wheel drive models Hub and bearing assembly mounting bolts Hub and bearing assembly O-ring seal from the steering knuckle bore (2500 series)
  3. Clean and inspect the O-ring seal
To install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly.
  2. Install the O-ring to the steering knuckle (2500 series).
  3. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent.
  4. Install or connect the following:

    Hub and bearing assembly Hub and bearing assembly mounting bolts. Tighten the bolts to 133 ft. lbs. (180 Nm). Front drive halfshaft assembly on four wheel drive models Electrical connection for the wheel speed sensor Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle. Tighten to 106 inch lbs. (12 Nm). Rotor Tire and wheel assembly.
You can go to autozone.com and register for free online repair manual with everything you need.

Jan 19, 2010 | 2004 Chevrolet Silverado 2500 Crew Cab

2 Answers

Torque settings


dear friend:
flywheel: 35nm - 30deg -15deg
cyl head:55nm - 30deg cold
big ends:25nm - 15deg
main b :50nm - 45deg -15deg

Sep 15, 2009 | Cars & Trucks

1 Answer

Front wheel bearing


Service and Repair
  1. Remove front hub/steering knuckle assembly from vehicle.
  2. Position front hub/steering knuckle assembly on a press and press front hub out of steering knuckle using a suitable removal tool.
  3. Remove E-clip from steering knuckle, then position steering knuckle onto a press.
  4. Using a suitable bearing remover, press bearing out of steering knuckle.
  5. Reverse procedure to install.

Jul 17, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...