Question about 2012 Toyota Camry

Open Question

HOW DO I REMOVE THE OUTSIDE DOOR HANDLE ON A 2012 CAMRY

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: To remove the interior door panel of a 1996 Toyota camry so that

My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Timmy P.

Posted on Mar 04, 2009

motorhead427
  • 24 Answers

SOURCE: Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle

Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.

Posted on May 30, 2009

  • 1986 Answers

SOURCE: 98 camry - driver door handle outside of car broke

go to a junk yard to get the part... it'll be $50 to $100 at a dealership, plus about $200 for labour charges...

It isn't that difficult of a job.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to see the outer door handle, it should be held in place by two bolts, one on either side of the handle...

roughly 30-60mins to fix

Posted on Sep 08, 2009

  • 1986 Answers

SOURCE: how to remove and replace drivers inside door

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can replace the handle

Posted on Oct 29, 2009

  • 4088 Answers

SOURCE: how to replace outside door handle on 2001 toyota

Remove the interior door panel, then the lock mechanism which should then reveal the screws or nuts that hold the exterior handle in place.

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota camry door handle


remove door trim panel, look see what's broke/unattached, go from there.

Apr 06, 2014 | 1997 Toyota Camry

1 Answer

How do you remove outside handle on driver's door on 2012 s60


On a S60, 2012, (drivers door) you first remove the plastic cover in under which you find the lock (with keyhole).
secondly, open the door and remove the 15 mm diameter plastic cover near the handle. Insert a long torx scrwdriver(T25 ?) in the
opening and while keeping the door handle "open" (this gives you the possibility to easily replace the handle later) Turn the torx until it stops
(do not use much force). Now you can pull out the metallic lock, peer
out the small white plastic under the door handle and pull out the handle. Do not turn the torx before you have replaced the handle.

In the case of back door, you start by finding the hole for the torx under the doors rubber sealing near the door handle.

Jan 08, 2013 | Volvo S60 Cars & Trucks

1 Answer

How To Replace The Exterior, Front Door Handle On A 2012 Toyota Camry


It removes just like the older style handles with one exception. You must remove the electrical clip/wire that attaches to it while still in the door. It has 2 black clips top/bottom for the harness, one white clip for the actual connector to come off handle (removes toward center of vehicle. After this is off and of course the part behind the moveable handle then the moveable handle will shift backwards and out while swinging rear away from door.

Dec 27, 2012 | 2012 Toyota Camry

1 Answer

The left outside door handle on the 1998 camry does not open door. How can I fix it ? Thanks in advance ! Tony


you would have to remove the inner door panel. Inspect the door handle rods, its possible one of the plastic retainers came loose. It maybe possible the handle is broken fron the inside. Hopefully this helps!!

Mar 15, 2010 | 1998 Toyota Camry

1 Answer

How to replace outside door handle on 2001 toyota camry car


Remove the interior door panel, then the lock mechanism which should then reveal the screws or nuts that hold the exterior handle in place.

Nov 07, 2009 | 2001 Toyota Camry

1 Answer

Need help on replacing door handle on toyota camry for the front driver side..


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If it's the inside handle, just disconnect the rod to the back of the handle to replace it. If it's the outside handle, pull back the weather seal and you'll be able to remove the bolts holding down the outer door handle

Sep 14, 2009 | 1995 Toyota Camry

1 Answer

Driver door handle of 2000 handle broken in half


FIRST YOU NEED TO REMOVE THE INSIDE PANEL. AFTER DOING THAT, WITH THE WINDOW ROLLED UP REMOVE 2 PLUGS ON THE METAL TO ACCESS THE TWO NUTS THAT HOLD ON THE OUTSIDE HANDLE. WHEN REMOVED, YOU CAN UNHOOK THE RODS THAT ACTUATE THE DOOR RELEASE. THE INSTALLATION IS THE REVERSE. I HOPE THIS HELPS. PLEASE FEEL FREE TO KEEP ME POSTED. THANKS FOR USING FIX-YA. ANY OTHER QUESTIONS, JUST ASK. GOOD LUCK

Sep 02, 2009 | 2002 Toyota Camry

2 Answers

Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle


Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.

May 30, 2009 | 1997 Toyota Camry

2 Answers

Need to remove inside handle to take off inside door panel


remove the screw and move assemble froward by hitting with your hand gently.

Apr 29, 2009 | 1998 Toyota Camry

3 Answers

95 Toyota Camry All outside handles broken off


I had the same issue with both the inside and outside door handles of my '95 Camry LE.

They are not too expensive. $15-20 each, sometimes you can find a set of four for $50. Try Amazon.com, that's where I just bought my new handles.

Replacement is time-consuming, but relatively easy to figure out. If you have the Haynes manual for your car, it will describe the steps required to disassemble the door paneling and replace the handles.
Have a Phillips AND Flathead screwdriver handy. You will need both to disassemble your door.

Good luck!

Feb 14, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
2012 Toyota Camry Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...