Question about 2002 Ford Escape

Open Question

Timing marks on 3.0 2004 ford escape - 2002 Ford Escape

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22114 Answers

SOURCE: need timing mark for camshaft

i have no idea what engine you have but if its a twin cam 4 cyl then their is a slot on the back of the cam that you put a flat bar in to hold them ,make sure that piston is down a bit then move the cams and make sure that on no1 cylinder the inlet valves are pointing upwards so both valves are closed .then bring the piston up and fit belt and make sure you turn engine over by hand 360? before you try to start

Posted on Jul 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frequently will not shift out of park - I usually have to turn the engine off several times and suddenly it will go into gear - what is going on?


Ford Escape Questions - shifter stuck in park - CarGurus

www.cargurus.com > Questions > Ford > Escape

CarGurusFeb 2, 2015 - shifter stuck in park - Sometimes my shifter is hard to get out of park. what would cause this, and how would I fix it?

Ford Escape Questions - SHIFTER - CarGurus

www.cargurus.com > Questions > Ford > Escape

CarGurusOct 28, 2011 - 1 out of 1 people think this is helpful. ... 2011 FORD ESCAPE WILL NOT GO IN TO GEAR DEALER SAID COFFE SPILLED IN IT . ... shifter stuck in park 13 answers ... Other times (and it's getting more often), I have to push and push (and keep pushing) the gear shifter ... 2012 Ford Escape XLT For Sale.

'01 Escape Stuck in Park; safety interlock - Ford Truck ...

www.ford-trucks.com > ... > Escape & Escape Hybrid

Dec 29, 2015 | 2012 Ford Escape

1 Answer

02 ford escape V6 what is positions of the camshaft sprocket timing marks and the crankshaft keyway


The camshaft and Crank mark (key way) should be pointing at each other (directly aligned with each other).
ie. The Camshaft mark will be point directly downward toward the crank and the crank mark (key way) will be pointing directly upward toward the camshaft.

Nov 16, 2014 | 2002 Ford Escape

1 Answer

Backfires in air filter while idling Kburnme2@gmai.co. l


check plugs. and have the timing marks checked.

Sep 27, 2013 | 2004 Ford Escape

1 Answer

2004 ford escape with codes po316 and po 305


PO305 Miss nr 5 cyl. PO316 Miss in first 1000 revelutions after start. Check Nr 5 cylinder plug, plug lead or coil over plug or nr 5 coil. Not sure what system that has. I suggest replace plug regardless but look at plug for track marks down side of plug & worn electrode etc... if all ok there check nr 5 injector.

Jul 14, 2012 | 2004 Ford Escape

1 Answer

Need timing mark for camshaft on a 2001 ford escape.


i have no idea what engine you have but if its a twin cam 4 cyl then their is a slot on the back of the cam that you put a flat bar in to hold them ,make sure that piston is down a bit then move the cams and make sure that on no1 cylinder the inlet valves are pointing upwards so both valves are closed .then bring the piston up and fit belt and make sure you turn engine over by hand 360? before you try to start

Jul 13, 2011 | 2001 Ford Escape

1 Answer

My lights for a ford escape 2001 wont work


check under the hood for black box,lift the cover off of black box,marked" main fuse and relay boxfuse positions should be marked on underside of the lid to main fuse panel box,that you have just removed.check for a blown headlamp fuse in that box. it's either a blown fuse in that box,or if only one headlights "out" it will be a blown bulb(headlight bulb) it's very unusual for both headlight bulbs to blow at once. so in saying that,look for a blown headlight fuse. thank you for choosing fixya.com.

Apr 09, 2011 | 2001 Ford Escape

1 Answer

How can you determine if a 3.0 is out of time can you turn the engine over and get all the marks to line up,


the only real way to tell is to take it and put it on a computer and it will inform you if it is out of time. The other way is to find top dead center on the number one piston and then match the marks up. Which is almost impossible because the timing ring is behind the flywheel. so your best bet is to take it to a good mechanic. sorry

Nov 23, 2010 | 2006 Ford Escape

1 Answer

Car dose not start after installing timing chains


You didn't by chance hit or move crankshaft position sensor when doing other work. (Behind crankshaft pulley)

Jan 22, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford Escape Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...