Question about 1983 Nissan 280ZX

Open Question

I have a 1983 280zx and my horn won't blow. I can't locate the horn under the hood is it a fuse or a wire disconnected ?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Murphybanton
  • 2004 Answers

SOURCE: My horn doesn't blow. I need the fuse box diagram for 2001 Altima

The fuse for the horn is located in your car bonnet where the fuses are.

Rate this

Posted on Apr 03, 2009

Ad
  • 7353 Answers

SOURCE: Is the horn relay in the fuse box under the hood?

Under the hood, NOT in the fuse box. Hard to tell you which one, but its the 4th one back, 3 wires, Light Green, Light Green and Red, and Black and Red. The Light Green is HOT and comes from the fuse 32 (15 amp)

Posted on May 10, 2010

  • 1 Answer

SOURCE: 2001 nissan maxima se keeps blowing the ecm 1 fuse

Did you find the prolbem? Im having the exact same problem you have. Mine is doing it after it died and I replaced the starter but now it wont start and the fuse eng cont 1 keeps getting burned out instantly

Posted on Aug 06, 2010

Danniboi
  • 1098 Answers

SOURCE: The horn on my 1985

Hi

the problem most likely is the horn switch, is this in the middle of the steering wheel or is it on the control stalk? thats most likely the cause, the metal clip has sliped out or the wire is touching.

Hope this helps
Regards

Dan

Posted on Dec 29, 2010

redneckrabbi
  • 35 Answers

SOURCE: The horn on my 2008 nissan versa stopped

It's possible under the hood or under the dash

Posted on Apr 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Horn blows when turning volkswagon passat


if you want to disconnect the horn, the easiest way is to locate it under the hood and remove one of the wires connected to it.

Nov 08, 2013 | 2003 Volkswagen Passat

1 Answer

My horn won't blow on my 2008 Nissan


locate the horn under the hood, and tap on it. if it makes some noise your horn may be bad. start simple first though shech fuses, and make sure horn is still plugged up.

Feb 02, 2013 | 2006 Nissan Armada

1 Answer

1989 buick lesabre horn won't blow .check relay's on passenger and driver side under hood .push horn button hear quicking in fuse box under dash on passenger side.help....


possible horn itself is faulty and needs replacing. you will need to locate where the horn is and apply power to the horn from the battery. if the horn sounds then you know that it is a broken wire th=o the horn

May 30, 2011 | Buick LeSabre Cars & Trucks

1 Answer

1995 Volvo Horn keeps blowing with key in ingnition, and engine running


You can do this for now so its not driving you crazy, then get it fixed.
If your car horn starts blaring and seems to be "stuck" (it won't stop blowing), you could be in for a few embarrassing moments. There's nothing quite like the stares and expressive hand gestures you can draw as your horn takes on a life of its own. There are a couple of things you can do to get the horn to stop.
If it got stuck when you pressed on the horn switch on the steering wheel, it could be because the switch itself is stuck. Press the horn switch again, or tap it a few times to see if it gets unstuck.
Turn off the engine and look for your fuse box. Look through the circuit descriptions and see if you can find one for the horn. If you can, pull the fuse. This should silence the horn immediately.
If you can't find the fuse box, can't remove the fuse, or the horn doesn't turn off, then you need to resort to more drastic measures. Open the hood of the car and try to locate the horn. If the rear of the horn is visible, you might be able to see the wires that lead to it. Disconnect the wires. If you can't disconnect them, then cut one of the wires. If you cut the wire, wrap the resulting two ends of the wire with tape so that they can't short out your electrical system.
You could disconnect the main wires that run to your battery. You shouldn't cut these but should disconnect them using a wrench. This might "reset" the horn. Hook the wires back up and if the horn doesn't turn back on, you should go directly to an auto repair shop to figure out what is going on. If the horn does turn back on, you'll need to locate and disconnect (or cut) the wires to the horn as previously described. Then, go to the auto repair shop and let them replace the horn for you.

May 09, 2011 | 1995 Volvo 850

2 Answers

How do I unplug the horn, it wont stop beeping Where is it under the hood


The horn is located behind the bumper cover, behind the grill. There should be a 20 amp horn fuse under hood in fuse box, and the horn relay is up under dash on the right side of instrument panel, unplug one of these, or both and the horn should stop beeping.

Jan 24, 2011 | 1991 Pontiac 6000

2 Answers

My horn on my Buick Skylark will not work. It blows every horn fuse we replace. How can I get it to work?


You may have a short circuit in your horn button causing the
fuse to blow when you press the button or in the horn itself.

1. Locate the horn under the hood normally in the front of
the engine compartment.
2. Once you locate the horn, disconnect the wire from the
horn.
3. connect a VOM (Volt Ohm meter) to the horn's wire.
plus(+) side to the wire and negative (-) side to ground
or some metal part on the car.
4, set the VOM to dc voltage and have someone press the
horn button. You should read 12 volts on the VOM, if
not you have a short in the horn button, if you do mread 12 volts
you have a short in the horn. Replace the horn....

Sep 10, 2010 | 1998 Buick Skylark

1 Answer

Horn blow on it own would like to disconnect it if possible not sure where to locate under hood


Well you really dont have to disconnect the horn itself...you can find the fuse for the horn, and just pull it out...

Dec 04, 2009 | 1996 Buick Skylark

2 Answers

My horn won't stop honking..how do I unplug the horn


have a look under the bonnet (hood) at the front of the car and you will see the horn or horns,just disconnect the wires and they wont work,or remove fuse for horn

Oct 25, 2009 | 1998 Plymouth Voyager

3 Answers

Horn wont work.i check the fuse in the door and


Maybe horn became unplugged. Put 12 v power to horn make sure horn works. Put test light on terminal on horn have someone press the horn button, if light comes on and horn does not blow you may need new horn. if light does not come on you may have bad contact at horn button, blown fuse, broken wire, bad horn relay or possibly just a bad ground.

Jun 22, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

Horn keeps blowing


there should be a relay box under the hood you will see the horn relay pull this out

Sep 03, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...