Question about Toyota Cars & Trucks

Open Question

Need valve clearance for car toyota corolla 1989 4a engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

starlet4life
  • 89 Answers

SOURCE: Adjust valve clearances 1987 toyota corolla

Im assuming its an 4AGE!?
http://www.ae92gts.com/ae92gts_valve_adj.html
And here one of my favorites...;)
http://www.billzilla.org/4agstock.htm

Posted on Oct 07, 2008

Technopro
  • 243 Answers

SOURCE: Valve clearances Toyota carolla

Hi,
the valves clearnces are: Inlet- 0.20 cold & Exaust- 0.25 cold.
Cheers

Posted on Apr 20, 2009

  • 2 Answers

SOURCE: 2001 Toyota Corolla lifter noise

Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

Posted on Jun 10, 2009

superjorge1
  • 8 Answers

SOURCE: what is the valve clearance in the 1993,1500cc

there is a white sticker underneath on the bottom side of your hood that should give you valve clearance specs.

Posted on Nov 14, 2009

johnjohn2
  • 5763 Answers

SOURCE: Valve Clearance

valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve clearances


intake is .006-.010 exhaust .010-.014 cold engine

Apr 20, 2014 | 1992 Toyota Corolla

1 Answer

Car stall 1998 toyota corolla, replace cam shaft sensor, crank shaft sensor, could it be the main fuse box


The Year 1998 Toyota Corolla engine will stall due to:
Spark plug faulty
High-tension cord faulty
Ignition problems:
• Ignition coil
• Igniter
• Distributor
Incorrect ignition timing
Vacuum leaks:
• PCV line
• EGR line
• Intake manifold
Throttle body
• Brake booster line
Incorrect valve clearance
EFI system problems
Engine overheats
Low compression

Feb 11, 2014 | 1998 Toyota Corolla

1 Answer

Hi, I need to find out the tension on the head bolts of a 1977 Corolla. It has a 3k engine also the clearance in the tappets.


0900c1528004fbee.gif

39-48 Foot pounds (Final torque)-Final torque must be reached in 3 equal stepsRecheck final torque in sequence
The valve clearance HOT, should be exh. .008" and int .006"

May 24, 2011 | Toyota Corolla Cars & Trucks

1 Answer

HI,I HAVE A 2000 TOYOTA COROLLA 1.8,WAS BROKEN TIMING CHAIN.I BUYED THE CAR LIKE THAT,THE GUY TELLME,ON THE TRUNK ARE TWO EXTRA CAMSHAFTS FOR REPLACE,I DID VALVE JOB,RESURFACE,NEW EVERYTHING.NOW THE ENGINE...


Initially you would need to check the following two things:
1. Re-check and confirm the valve timing by removing the valve cover. Follow the manufacturer's recommendations.
2. Re-check the valve clearance.

Apr 27, 2017 | 2000 Toyota Corolla

4 Answers

What are the valve clearances for a 2e 12 valve engine?


I have Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than that the engine will stop. I check the engine timing with both the cam and crank on the correct mark. Sounds like the carburetor failure but i had service it but still the same. If i turn the distributor to the right (******) the engine rpm drop, than i turn it to the left (advance) but the rpm drop too, as i know the engine rpm should raise high and could hear the pinking sound from the valves if the the engine accelerate. For your info, i bought the cylinder head from someone who previously general overhaul his engine about 6 months ago. He dismantle his engine because of con rod problem. I just fix the cylinder head to my engine without grinding and adjusting the valves because it had been grind and adjusted 6 months ago. I check the spark plugs but look all black. I pull the plug cable one by one during the running it sounds all ok. Now i wonder what is actually wrong with the engine? Do i need to adjust the valve clearance too? What is the valve clearance for both exhaust and inlet, hot and cold? If i do the valve adjustment and yet still the problem, what is next?

Jan 02, 2011 | Toyota Corolla Cars & Trucks

1 Answer

What are the torque specs for TOYOTA 3ZZ engine when overhauling it


what is the valve clearance on my corolla altis 3zz engine

Aug 18, 2010 | 2004 Toyota Corolla

1 Answer

Need to know how to adjust valves, or a print-out of adjustment procedure and tools reguired. 1989 toyota gt-s corolla 1600 16 valve 4a-ge cal engine


This engine utilizes shims to set proper clearances, you will need a micrometer, valve clearance adjustment tool set for shimmed lifters,small magnetic arm, appropriate shim selecting charts (manufacturer will have this if you can get the nec. measurements).
Measure thickness of shims removed (using micrometer) and use this formula where T=Thickness of old shim; A=Valve clearance measured; N=Thickness of new shim required.
Intake valves:   N = T + (A - 0.02 mm (0.008 in.)) Exh. valves:     N = T + (A - 0.25 mm (0.010 in.))
Then you need to find shims as close as possible to the calculated values.
Valve clearances (cold) are as follows: Intake 0.15 - 0.25 mm (0.006 - 0.010 in.) Exhaust 0.20 - 0.30 mm (0.008 - 0.012 in.)
Note, if you are not familiar with precision measuring using a micrometer, this may be better left to a trained tech. These are high revving little power plants and you don't want a problem at 8K rpm.

Jun 05, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

Valve clearances Toyota carolla


Hi,
the valves clearnces are: Inlet- 0.20 cold & Exaust- 0.25 cold.
Cheers

Apr 20, 2009 | Toyota Corolla Cars & Trucks

3 Answers

Toyota corolla 1996


If you remove thermostat water will circulate too fast and will not cool down, replace thermostat and check if your fan is turning in correct direction. Also make sure your ignition timing is ok. I found on some vehicles the waterpump seems ok but when vehicle starts heating up the impeller gets loose on the shaft. Check your brakes if they are not binding.

Jul 29, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...