Question about 2009 Dodge Journey

2 Answers

2009 dodge journey a/c works heater doesn't - 2009 Dodge Journey

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Dodge Expert
  • 652 Answers

Check to see if the heater hoses coming in the car is hot whit engine at opperating temp if so problem is in the hvac system in the dash

Posted on Nov 14, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 3,180 Answers

Check the valve switch in engine bay were the lines come out for the heater, there is 2 pipes that go into a valve and 2 wires. these can seize up and then the piston inside will not move to open the flow.

Posted on Oct 15, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jturcotte
  • 7713 Answers

SOURCE: How do I check the transmission fluid on a 2009

below is info from the owners manual. I do not have a repair manual, but you may be able to buy one that would say how to check the transmission fluid on the 3.5L. It sounds like they don't expect you will need to check it.

Fluid Level Check - Vehicles with 3.5L Engine

The automatic transaxle has no dipstick and is dealer

serviced only.

Fluid Level Check - Vehicles with 2.4L and 2.7L

Engines

Use the following procedure to check the automatic

transaxle fluid level properly:

1. Park the vehicle on level ground.

2. Run the engine at curb idle speed for a minimum of 60

seconds.

3. Apply the parking brake fully.

4. Place the shift lever momentarily in each gear position

ending with the lever in PARK.

5. Wipe the area around the dipstick clean to eliminate
the possibility of dirt entering the transaxle.

6. Remove the dipstick and determine if the fluid is hot

or cold. Hot fluid is approximately 180°F (82°C), which is

the normal operating temperature after the vehicle is

driven at least 15 mi (24 km). Hot fluid cannot be held

comfortably between the fingertips. Cold fluid is at a

temperature below 80°F (27°C).

7. Wipe the dipstick clean and reinsert until seated. Then,

remove dipstick and note the reading.

a. If the fluid is hot, the reading should be in the

crosshatched area marked "HOT" (between the upper

two holes in the dipstick).

b. If the fluid is cold, the fluid level should be between

the lower two holes in the area marked "COLD."

If the fluid level is low, add sufficient fluid through the

filler (dipstick) tube to bring it to the proper level. Do not
overfill.

Posted on Oct 04, 2010

bikinimechan
  • 220 Answers

SOURCE: Replaced brake pads on 2009 Dodge Journey, but now

Well you need to check your fluid level on the master cylinder first. Then I suggest that you bleed the brake system. Always start bleeding from the wheel furthest away from the master.

Posted on Nov 22, 2010

SOURCE: how to replace rear rotors

They should last for 5 years or more
Maybe machine every 60,000 to 80,000 miles

If you ever did any brake work, I don't see
a problem

Posted on Dec 08, 2010

Transdoc
  • 829 Answers

SOURCE: 2009 dodge journey...rear brake

If the e-brake cable is attached to caliper the piston is threaded. I use a very inexpensive tool i bought at the parts store . you will need to turn and press the piston at the same time. be aware that the two different sides are threaded oposite of each other.If the e-brake cable is not attached to caliperr the a c clamp should do the job.

Posted on Jan 11, 2011

radar001
  • 1051 Answers

SOURCE: How to replace the front rotors on a 2009 Dodge

While I could explain what to do, it may be better if you have detailed step by step instructions with illustrations on hand. You can get these free by registering for free at www.autozone.com Once registered you'll have access to a variety of DIY repair manuals.

Posted on Jan 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 dodge journey blows cold air on passenger side


Help with heating issues, blend actuator - Interior - Dodge ...

www.dodgejourneyforum.com/.../5304-help-with-heating-issues-blend-a...
Jan 13, 2014 - My 2009 Journey R/T is only blowing hot air out the driver side vents, while the other vents (passenger and rear) are blowing cold air ... Thanks Frogbox....keep in mind that the info is for the 2009 model and I guess it also applies to2010's. 2009 journy sxt heat/cool issue
Oct 16, 2014
Air Conditioning?
Dec 22, 2012
Rear heater A/C
Dec 22, 2012
More results from www.dodgejourneyforum.com

In a 2010 dodge journey why heat comes out just one side


Jan 10, 2016 | 2010 Dodge Journey SXT

1 Answer

How to replace heater core on 2009 dodge journey


Heater cores can be very challenging and time consuming to access. I suggest you don't even start until you have a good shop manual for that model, a 1/4 inch drive ratchet with short and long extensions and 1 or 2 u joints and lots of patience working in tight areas

Dec 01, 2014 | 2009 Dodge Journey

1 Answer

Can i buy a y fitting on my own for the 2009 dodge journey heater core


IT should be available from the dealer spare parts. failing that get one from a wreckers that handles your make of vehicle/ Lastly there are hose specialist shops (hydraulic hoses) that sell a range of brass fittings that will be useful for what you want.

Dec 01, 2014 | 2009 Dodge Journey

1 Answer

How do i replace a heater hose onn a 2009 dodge journey sxt


Go U-Tube type in 2009 dodge and there should be a video on how to solve your problem

Sep 26, 2013 | 2009 Dodge Journey

1 Answer

How do you change a heater hose on a 2009 dodge journey


how do you change heater hose on 2009 dodge journey 2.7 v 6

Jun 26, 2012 | 2009 Dodge Journey

1 Answer

2009 dodge journey


Dodge Journey owners please go to http://www.change.org/petitions/dodge-journey-s-defects sign and pass along please. Dodge had built and sold this car with defects that they refuse to fix, this is not the kind of quality we should expect.

May 21, 2012 | 2009 Dodge Journey SXT

3 Answers

Dodge Journey windows going down by themselves


I have heard of this in fact, In a 2009 Journey R/T. A trip back to your dealer is in fact the best action. The one I know of had multiple electrical issues after the initial window concern within a few months. ie. wipers, signals, radio, heater not working.

Jul 03, 2009 | 2001 Dodge Durango

Not finding what you are looking for?
2009 Dodge Journey Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...