Question about Nissan Cars & Trucks

Open Question

How to fix a po183 code problem - Nissan Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Po463 po183 nissan versa


code p 0183 refers to fuel temperature sensor A --high input===causes --wiring short to positive ---fuel temp sensor--ECM
code p 0463 refers to fuel tank level sensor --high input===causes --wiring short to positive fuel tan level sensor ---ECM
if the temp sender and the fuel level sensor ( both located in the same fitting in the tank)are in the same wiring harness then there may be a connection as the wiring short to positive is common
check for the harness rubbed through somewhere causing the problem or an after market screw screwed into the harness some where

Dec 05, 2016 | Nissan Cars & Trucks

1 Answer

How do i fix my 2002 Altima that will not start?


Depends on the make but most likely i would say it is a bad connection, so i would check to see if the wires are possibly damaged. The two codes dont really relate problamatically.

If you have a volt meter you can check to see if the connections are grounded or damaged. I would start there. If you dont have a volt meter a cheap one is about 20$ and you can find on youtube how to use it.

Oct 08, 2015 | Cars & Trucks

1 Answer

I got a diagnostics reading for my 1996 subaru legacy outback and got codes po183. got any answers for me?


P0183 Subaru - Fuel Temperature Sensor 'A' Circuit High Input ' Add Comment
Possible causes
- Faulty Fuel Temperature Sensor
- Fuel Temperature Sensor harness is open or shorted
- Fuel Temperature Sensor circuit poor electrical connection
What does this mean?
When is the code detected?
An excessively high voltage from the sensor is sent to ECM.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0183 Subaru Description
The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the fuel temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increase

this sensor is in the fuel tank on the fuel pump assembly. If you look under the carpet behind the rear passenger seat, you should see a sort of rectangular access cover. Underneath this cover is the connector to the fuel pump. Make sure that all looks good. Could just be a bad connection. Sometimes when you have the fuel filter replaced a place will unhook this connector. When it's reconnected it might not be fully seated or have a bent pin or something

http://legacygt.com/forums/showthread.php/code-po183-236198.html?s=4cf7b653edff15233184a4ded52fe754&p=5040847
25640006-5sp5orn0xnhdqraxk0v0421v-4-0.gif

25640006-5sp5orn0xnhdqraxk0v0421v-4-2.jpg

Apr 11, 2015 | 1996 Subaru Legacy

1 Answer

Po183 nissan murano 2004


Version:0.9 StartHtml: 105 EndHtml: 1264 StartFragment: 334 EndFragment: 1232 The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the fuel temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

Apr 18, 2012 | 2004 Nissan Murano

2 Answers

Obd code po183


Google bod code P0183 and this will tell you the answer

Oct 24, 2011 | 2005 Nissan Pathfinder

1 Answer

My 2004 nissan sentra will not start, just turns over.obd code po455,po183 and po463 not sure what to check. I tried gas cap, took gas line off and turned car over but no fuel, it my be my fuel pump but...


P0183 = Fuel temperature sensor A circuit, high input

P0455 = evaporative emission (EVAP) control system leak detected (no purge flow or large leak)

P0463 = fuel level sensor circuit, high input.

Check to see if the charcoal (evap) canister is full of fuel. If so, empty it. Check for a faulty canister vent valve. Check for a short to ground in wiring to fuel temp sensor and fuel level sensor.

Feb 27, 2011 | Nissan Sentra Cars & Trucks

1 Answer

How repair replace part for code p183,p420,p430,p462


PO183--Engine Fuel Temp Sensor,Verify PID Value
PO420---Catalyst System Efficiency Below Threshold (Bank1),O2 Sensors,Coolant Temp Sensor,Misfiring,etc
PO430--- Catalyst (Bank2)
PO462---Fuel Level Sensor Circuit Low Input,pump module,etc

Well----Codes do not tell you what part to replace,Just that a possible system failure has ocurred
Unless you have a scanner,not a code reader and a trouble chart,your done.
No experience,done

I would speculate, that you only have a couple of, not too serious issues,but wouldn't guess,it doesn't work that way.
Always test,and only replace things if they fail a test.

Is the battery okey and alternator output good ?

Oct 21, 2010 | 2004 Nissan Titan

2 Answers

Does the kia sorento 2.5 crdi xe have a timing on a 2004 plate


THE KIA SORENTO HAS 3.3 AND 3.8 ENGINES THEY HAVE TIMING CHAINS.THE KIA 2.4 ENGINES HAS TIMING BELT GUIDE PLATE.

Jun 21, 2010 | 2004 Kia Sorento

1 Answer

P0183 Fuel Temperature Sensor A Circuit High Input 2003 Hyundai SantaFe.. What do I need to replace and where is it??


i have the same problem with my 04 santa fe PO183 at first and now PO335 come up. and now it wont start, did anyone find the problem?

Oct 23, 2008 | Hyundai Santa Fe Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...