Question about 1994 Honda Civic

2 Answers

Replace clutch - 1994 Honda Civic

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

How to
where to buy it, what brand is best, who sells it...
who can do it.
what it costs
how many hours to do it
ask a questions.

Posted on Oct 17, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 3,204 Answers

This is easily done on this engine. just need a jack and some wheel ramps. take the battery off undo the starter motor, undo the box bolts to the engine and take the plate out. jack up remove the engine mount on gearbox side. ,then jack up after so engine is at an angle and pull off the gearbox and clutch housing oh forgot to say remove the gear link pin and clutch cable. now you can see the clutch and remove it. when putting the clutch back in locate the new clutch with a socket one of the long types think it was an 18mm just fits in right for the locator. then bolt down the new clutch take out the socket. and put back the engine in reverse. wiggle the gear box and casing to locate back onto the new clutch if dont fit in first time.

Posted on Oct 15, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a place to add transmission fluid to a 2002 kia sport age clutch, mine is slipping


no transmission fluid in a clutch system
only brake fluid
and that is in the reservoir at the top of the clutch master cylinder or shared with the brake master cylinder
if the clutch is slipping it indicates the need to replace the clutch master cylinder or tor replace the clutch assembly
Clutch master cylinder is cheaper and easier and is generally the main reason for slipping clutches unless you have a cable clutch in which case replace the cable

May 27, 2017 | Kia Cars & Trucks

2 Answers

Clutch and engine check light plus clutch got eaten up in 2 weeks time


If ur have replace ur clutch but the check light still on it mean your CO sensors need to clean or replace.

Jun 17, 2016 | Nissan Cars & Trucks

2 Answers

Hyundai. Tucson, 59 plate' clutch slips at high speed when changing gear


check /replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from overheated clutch)

Feb 10, 2015 | Hyundai Tucson Cars & Trucks

2 Answers

How can i fix the squeak on the clutch on 2007 crv


Most likely the it is a worn clutch. Replace it as soon as possible before the metal parts start to wear out which can be expensive to fix. All manual cars needs clutch replacement at some point.

Sep 05, 2014 | Honda CRV Cars & Trucks

1 Answer

Clutch stick gets stuck and I can't change gears


It can be due to the:
- Engine rpm high.
- Brake oil level too low.
- Brake oil contaminated.
- Air in the clutch system. (Bleed air)
- Worn out master cylinder clutch, upper. (Replace)
- Worn out clutch cylinder clutch, lower. (Replace).
- Worn out clutch plate. (Replace)
- Worn out pressure plate. (Replace).
- Clutch bearing defective or seized. (Replace).

Aug 30, 2013 | 1999 Toyota Corolla

1 Answer

How Do You Replace Clutch Master cylinder


honda civic.... replaced with new clutch and clutch kit... now i have to replace the clutch master cylinder..... only done 167k since new clutch.... should this have been checked when the clutch was replaced?

Jan 11, 2011 | 1998 Chevrolet Camaro

1 Answer

Replaced master and slave clutch cylinders but


if you replace and shure to make a good bleed on clutch fluid, then replace clutch disc

Jul 27, 2010 | 1991 Toyota 4Runner

1 Answer

Chevy l989 4X4 5 speed manual clutch not working


Almost every time a clutch is replaced in a GM with hydraulic release system that system is replaced as well. You can try, and try, and try again to bleed it, but you will eventually replace the clutch slave and master cylinders. Once the slave is allowed to fully extend, it is then virtually impossible to make it function correctly again.

Jul 08, 2009 | 1998 Volkswagen Passat

1 Answer

Clutch fried on 2007 Hyundai Tuscon


Yes they are related. I had the same thing happened to me the forks got bend so I had to replace the whole clutch system, clutch cover where the forks are at and the clutch itself. When they replace the clutch plate they should also replace the clutch cover or vice versa. I don't think it's you it's probably just the car. I suggest you have the clutch plate and clutch cover replaced.

Jan 21, 2009 | 2005 Hyundai Tucson

Not finding what you are looking for?
1994 Honda Civic Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...