Question about 1998 Chevrolet K1500

1 Answer

No spark ,checked crank sensor cam sensor,replaced coil,checcked coil wire ,checked power to coil,checked fuses,

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 635 Answers

While cranking check with a test light that the coil is getting a signal from the ecm to fire.

Posted on Nov 03, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 23 Answers

SOURCE: no start, no spark, no signal to the coil

there is a fuse that works the battery try checking if it is still good

Posted on Mar 03, 2009

sledge1863
  • 149 Answers

SOURCE: 1995 lumina cranks but will not start

Sounds like it has jumped timing, dont know which engine you have so could be chain or belt.

Posted on Mar 23, 2009

Davaith
  • 56 Answers

SOURCE: 2000 chevy venture doesnt start

Not the IAC, or MAF, or 02

Does the Van Crank over?
Have you checked the IGN Relays? 1,2,and 3?
How did the Battery test out?
Anything below 11.9v battery is dead.
So I suggest that you do not throw any more parts and check the battery again.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

97 oldsmobile achieva wont fire changed coil pack spark plugs cam sensor still wont start


Make sure battery has a full charge and battery connections all good.
If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse.
If you having a problem with more than one system, I want to check for rpm signal, that usually comes from the crank sensor. Not sure why you replaced cam sensor? I always want to check sensor wiring circuits before replacing anything. Don't replace anything unless your testing points in that direction.

Nov 04, 2016 | Oldsmobile Cars & Trucks

1 Answer

Getting no spark out of coil


what about the coil wire? Turn it over in the pitch black of the night and look for blue when or if you see it you will know

Jun 01, 2015 | Cars & Trucks

1 Answer

I have a 91 chevy corsica no spark on crank replaced coils wires and plugs still no spark brian


run the fault codes and check for cam/crank sensors. check operation of immobiliser. check fob key battery
check for ING fuse or fusible link near battery

Feb 14, 2015 | 1991 Chevrolet Corsica

1 Answer

I have a 1996 Toyota Corolla that has no spark. We have checked. Cap, rotor, coil, cam sensor, ignitor, all ok, tested crank sensor and it was bad so replaced it and still cranks with no spark. Checked...


In most cases the crank sensor generates AC voltage when the crankshaft is moving. You would check it with a volt meter.
How did you test the crank sensor ?

May 04, 2013 | Cars & Trucks

2 Answers

It turns but it wont start,it has gas and power


Pull off the coil ignition cable at the distributor and check for spark coming out of coil when cranking engine over. Use a heavy rag or glove to hold the wire 1/4 inch from a metal ground. Should see a strong blue spark when cranking to verify ignition is good. If no spark, check for battery voltage to coil on the coil primary. If you have current to the coil, suspect a bad coil, ignition module, crank position sensor, or cam position sensor, or pcm. The coil, ignition module, and sensors can be tested before replacing.

Jan 29, 2013 | Cars & Trucks

1 Answer

After replacing the timing belt and resetting the timing correctly all of the sudden there is NO FIRE to the system from the battery.The car will turn over but no spark.NEED HELP, if anyone has an ide


Breeze, 4 cylinder: check fuse # 5 (20a), fuse #1 (10a), fuse # 10 (10a)- in the power distribution box. Check for power to the coil on the dark green wire with orange stripe. If power there, test the coil. If coil is good, suspect the cam position sensor or the crank position sensor.
Breeze, 6 cylinder: check fuse # 5 (20a), fuse # 10 (10a). Check for power to coil on the dark green wire with orange stripe. If no power to coil, try a new or known good Auto Shutdown Relay (in the power distribution center). If still no power to coil, may be a problem in wiring harness. If there is power to coil, and still no spark, test the coil. If coil is good, suspect the cam position sensor (in the distributor), or the crank position sensor. If all check good, may be a problem in the wiring or the pcm (computer).
Good luck.

Jun 07, 2012 | 1996 Plymouth Breeze

2 Answers

1997 dodge ram won't start. My fuel pump does not run and coil won't spark. Iv'e checked fuses and relays and they look fine. Could a bad fuel pump cause the asd to kill power to the coil?


First check any ignition/fuel related fuses. Check to make sure you have 12 volts coming into the pump and coil. If nothing to the fuel pump replace the fuel pump relay - if you do have power to the fuel pump then replace the pump. If nothing is coming to the coil it is either an ignition relay or a wiring issue. If you have 12 volts to the coil but no spark then replace the coil.
Also the fuel pump/relay would not kill the coil.

Jan 21, 2010 | 1997 Dodge Ram 1500 Club Cab

2 Answers

2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START


i have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack

Sep 07, 2009 | 2001 Ford Taurus

2 Answers

No spark


Could be many issues: cam sensor, crank sensor, ECU. wiring ect...
I'dI start by checking/replacing the crank or cam sensor if ok I'd proceed from there. What car, year and engine?

Thanks,
Tom

Aug 22, 2009 | 1997 Chrysler Concorde

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...