Question about Cars & Trucks
Loosen the fittings on both lines of the compressor a little bit. One should pull air in and the other exhausts. Clutch needs to be engaged and the regulator open. Be careful, they pump hi pressure.
Posted on Nov 21, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It could be a wheel speed sensor that went out or something... When working with the wiring, something could have just gotten crossed or tapped to get these codes as well. The compressor shouldnt be running anymore if everything was tied off properly. Take it in somewhere and have the codes cleared and that should fix the problem hopefully. I know AutoZone has a reader, but I do not know if they have they ability to clear the codes.
I hope this helps.
Posted on May 13, 2009
I have a 1998 Deville and both rear coil springs are broken.. It also has the air shocks that I dont think work.. Can I put regular shocks in and is there a after market coil spring out there for it ??
Posted on Aug 07, 2009
There is a heigth sensor for the level control and the level control has a motor to operate it. One of the two may be bad. I would check the relay first to see if power is going to the motor.
Posted on Jan 16, 2010
Tips for a great answer:
May 19, 2011 | 1997 Cadillac DeVille
Jan 14, 2011 | Cadillac DeVille Cars & Trucks
Nov 20, 2010 | 2001 Cadillac DeVille
Nov 19, 2010 | 1994 Cadillac DeVille
Jul 13, 2010 | 1995 Cadillac DeVille
Jul 02, 2010 | 1997 Cadillac DeVille
Jun 04, 2010 | 1988 Cadillac Sedan DeVille
May 23, 2010 | 1998 Cadillac DeVille
Feb 17, 2009 | 1996 Cadillac DeVille
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: