Question about Chrysler PT Cruiser
I need to replace the battery cables on my 2005 PT Cruiser (not turbo). I'm having trouble finding a video or instruction set for this. How do I do it?
Disconnect the cable at the battery, jack the car up safely, from underneath follow the cable to the starter, disconnect it from there and take old cable to parts store to match up new cable for proper length.
Posted on Oct 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this instruction is general for all vehicles. i am sorry that i do not have particularly for your 2001 chrysler PT cruiser.
first, identify the alternator.
remove the fan belt on the alternator,
label and remove all wires that is attached to it.
remove all bolts that is holding it.
remove the old alternator.
do the reverse on installing it.
tnx 4 using fixya,
Posted on Aug 30, 2008
the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?
Posted on Jan 25, 2009
grt one at any parts store, it should be in the fuse or electrical box, look in the owners manual, pull out the the ole and plug in the new
Posted on May 08, 2010
SOURCE: The serpentine belt on my
You will need to turn the adjusting bolt in order to be able to have enough slack to place the belt around all the pully's. Don't forget to loosen the locking nut. I believe you have to turn the adjusting bolt clockwise to move that pully in order to be able to route the belt and place it over all the pully's but don't quote me on this. Common sense will tell you which way the pully moves to make more slack in order to put the belt around all the pully's. You can see how it is routed as well as where the adjusting bolt is located in the diagram below. Check all the pully's that the belt goes around to make sure they all spin freely to make sure none of them locked up and that this was the reason your belt snapped in the first place. I hope this helped and good luck. Have fun at work tomorrow....Here's your diagram:
Posted on Feb 23, 2011
Tips for a great answer:
Feb 03, 2016 | Cars & Trucks
Mar 22, 2014 | 2005 Chrysler PT Cruiser
Oct 18, 2013 | Chrysler PT Cruiser Cars & Trucks
Mar 14, 2013 | 2005 Chrysler PT Cruiser
Aug 22, 2011 | 2005 Chrysler PT Cruiser
Jul 29, 2009 | 2004 Chrysler PT Cruiser
Oct 20, 2008 | 2005 Chrysler PT Cruiser
110 people viewed this question
Usually answered in minutes!