Question about Chevrolet Silverado 1500

Open Question

How to install the motor mounts on a 97' Chevrolet z71

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

customcan
  • 113 Answers

SOURCE: how to install a motor mount on a chevrolet 2000 impala 3800 series 2 v6

You have more than one engine and transmision mounts on your vehicle
upper mounts easy to install but bottom two is little hard because hard access to bolts good idea to work with lift and make sure your engine secured on level before losen any bolt from mounts !!! If you dont have proper tools good idea to let some one do it for you be safe!

Posted on Feb 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you fix a fan speed switch that won't blow until it's on 4 or 5 in a 2004 z71 Chevy Silverado 1500


you need to replace the fan resistor located by fan motor if not there then trace red and black power wires to locate resistor behind or under dash it wont be mounted far from fan motor

Mar 13, 2016 | 2004 Chevrolet Chevrolet Silverado 1500...

1 Answer

Will a 99 Yukon trans go into a 97 z71?


If they are both 4L60E's yes. But I think the Z71 uses a 4L80E.

Oct 02, 2013 | 1998 Chevrolet C1500

1 Answer

WILL A 93 S10 4L60E FIT A 97 Z71


There were changes made to that transmission in 1994 so the answer would be no. It is also my understnding that both were used in 94 so you have to be careful there as well. If I remember correctly there should be a letter or maybe number cast into the case where the torque converter fits.I think you will find it at about the 10 o'clock position. If your trans has it you have to put that style back in. If it doesn't you can't use it. Hope this helps.

Nov 18, 2011 | 1994 Chevrolet C1500

1 Answer

Installing brake shoes on 2005 z71


how do i remove back brake shoes on a 2005 chevy z71

Mar 15, 2010 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

I have a 97 z71 with 143000mls on it recently put


idealer arm
pitman arm
sway bar
check cv axles too
contorl arm bushings

Mar 06, 2010 | 1997 Chevrolet K1500

1 Answer

Silverado 1500 Z71 off road, 5.3L. Details on fr


This is for the front: Removal & Installation
  1. Remove 2/3 of the brake fluid from the master cylinder.
  2. Remove or disconnect the following:
    • Wheel
    • Caliper. Suspend the caliper from the frame with mechanic's wire. Do not allow the caliper to hang from the brake hose.
    • Caliper mounting bracket bolts
    • Caliper mounting bracket from the steering knuckle assembly
    • Brake pads from the caliper mounting bracket
    • Clips from the inside ends of the caliper mounting bracket and discard
To install:
  1. Install or connect the following:
    • Clips to the inside ends of the caliper mounting bracket
    • Brake pads to the caliper mounting bracket
    • Inner pad (1 wear indicator)
    • Outer pad (2 wear indicators)
    • Caliper mounting bracket to the steering knuckle assembly
  2. Perform the following procedure before installing the caliper mounting bracket bolts:
    • Remove all traces of the original adhesive patch.
    • Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
    • Apply red Loctite®272 to the threads of the bolt.
  3. Install or connect the following:
    • Caliper mounting bracket bolts to the steering knuckle. Tighten the caliper guide pin bolts to 74 ft. lbs. (100 Nm) on 15 series or 80 ft. lbs. (108 Nm) on 25/35 series.
    • Caliper
    • Tire and wheel assembly
  4. Refill the master cylinder to the proper level with fresh brake fluid. Pump the brake pedal slowly and firmly in order to seat the brake pads. Burnish the brakes as needed.

Oct 12, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

97 z71 vortec 5.7 replaced fuel pump.getting fuel but won't start


The # 5 cylinder is miss firing. not getting fuel. Could the injector just be stopped or the crankshaft sensor in gone.

Jun 26, 2009 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Easy way to replace starter on 97 blazer s10


I need to change the starter on a 97 Blazer s10 4wd . it a v6 vortex engine. What is the esiest way without jacking up the engine.

May 29, 2009 | 1997 Chevrolet Blazer

1 Answer

2000 chevy silverado z71 installed new motor-wont start


well are you getting anything give me a starting place

May 31, 2008 | 2000 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...