Question about Chevrolet Astro

Open Question

Nissan primera p12. Fuel leak from fuel pump.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: excessive fuel consumption

I could recommend a product I use on my own cars called SeaFoam. You can buy it at most autoparts stores like PepBoys and what it does is clean out alot of the carbon buildup, which improves gas milage and gets the engine running like new. Just follow the instructions on the back.

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: how to reset the engine

turn ignition round to 2nd position turn everything else off like the radio heaters etc. then push and hold down info whilst doing this turn the volume key towards the passenger window and a secret screen will apear here you can do everything that a garage can do. hope this helpd ya. kennylad

Posted on Dec 07, 2008

  • 1 Answer

SOURCE: 2005 altima fuel pump

The tank does not need to be dropped. There is a access panel either under the cushion of the rear seat or in the trunk. I have to replace the pump on my 02

Posted on Feb 06, 2009

4743micheal
  • 54 Answers

SOURCE: Nissan Primera petrol P12 - malfunction warning

tats the engine management light mate usally comes on when u have low oil or antthing to do with the engine bring it to nissan dealer if its not low oil they will hook it up to a machine and bingo they have your problem.

Posted on Feb 24, 2010

SOURCE: HOW TO REPLACE A FUEL PUMP FOR A NISSAN XTERRA


Removal & Installation

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:

    Negative battery cable Fuel pump module harness connectors Filler hose shield Fuel pressure and return lines Filler hose Vent hose Evaporative Emissions (EVAP) hose Fuel tank skid plate Fuel tank Fuel level sender Fuel pump

To install:
  1. Install or connect the following:

    Fuel pump Fuel level sender. Tighten the screws to 17-23 inch lbs. (2.0-2.5 Nm). Fuel tank. Tighten the bolts to 27-36 ft. lbs. (37-49 Nm). Fuel tank skid plate. Tighten the bolts to 27-36 ft. lbs. (37-49 Nm). EVAP hose Vent hose Filler hose Fuel pressure and return lines Filler hose shield Fuel pump module harness connectors Negative battery cable
  2. Fill the fuel tank.
  3. Start the engine and check for leaks.

Posted on Mar 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is immobilzer reciver on a nissan primera p12


Peter, I think it is part of or at least goes around the ignition switch.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Nissan Primera P12 Immobiliser Ring Receiver Aerial Key Reader 28590 C9965
Nissan Primera P12 Ignition Immobiliser Fault Solution
nissan primera p12 immobiliser receiver location Google Search

May 19, 2016 | Nissan Cars & Trucks

1 Answer

Change boot strut on nissan primera


There are steel clips on either end of the struts use a flat head screwdriver to remove them and the strut should pop out with a little persuasion. Make sure to hold boot lid in case it falls on fingers.

Dec 28, 2013 | 2005 Nissan Primera 1.8

1 Answer

How to change fuel filter on 2003 nissan primera


2003 Nissan Primera, the P12 engine runs on chain NOT belt!!! You don't need to change the chain unless in very very unlikely case the chain snaps.

Mar 15, 2013 | 2003 Nissan Primera

1 Answer

Hi all, Nissan Primera, P12, 2002 is over revving, especially when idling. Sprayed the MAF sensor and changed the air filter but that didn't make any difference. It also uses lots of petrol sinc


Sounds like a vacuum leak or a bad intake manifold gasket. Take engine cleaner and spray the gasket where the intake manifold bolts onto the motor while running. If there is any change in the idle, your gasket needs to be replaced. Spray all vacuum hoses too. This is the best and cheapest way to test. Let me know how you do please

Jan 20, 2013 | Cars & Trucks

2 Answers

Nissan primera p12 2005 wiring manual


please i need electrical shematic for nissan primera 2005 p12

Feb 26, 2010 | 2003 Nissan Altima

2 Answers

I lost my nissan primera 1996 radio code


just take it in to your local nissan dealer - they will look it up for you

Jan 30, 2010 | 1996 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...