Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: heater blower noisy
there should not be no more then three screws and unplug and the blower is out and you say its noisy check for leaves and to make sure the blower is not hitting anything before you go to buy another one.
Posted on Feb 14, 2009
Try the following & I am sure about the results;
Remove two screws on bottom of front face of glove box
Remove Glove box
Heater is just behind the glove box on the right side (the motor points downward and the fan is in a big round shroud).
Un plug the cable bundles that get in the way of removing the blower moter (the motor will come straight down).
There are three bolts holding the blower assembly in place, remove them and the blower assembly can be removed (pull downward).
Hook the black wire from the new motor up to the connector were the wire with the line on it (from the truck) was and the red wire from the motor to the solid colored wire from the truck (the wires from the motor had leads that you could slide into the connector from the truck).
Good Luck & Thanks,
Posted on Aug 20, 2009
Testimonial: "Very close... only had one screw on the right side of the glove box to remove then took the shock looking part off. Took 2screws from computer, done!"
if you have a 1ZZ engine
4.2 quarts, 4.4 quarts with oil filter change
if you have the 2ZZ engine (XRS model) it is
4.4 quarts, 4.6 quarts with oil filter change
NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.
Posted on Sep 10, 2009
Yes could be the blower relay or loose ground in the blower circuit.
Try your local library they may have a manual with the cicuit diagram.
Posted on Nov 02, 2009
Tips for a great answer:
Jun 05, 2014 | 2003 Toyota Corolla
Jul 27, 2012 | 2009 Toyota Corolla
Apr 15, 2012 | 1997 Toyota Corolla
Feb 16, 2010 | 1986 Toyota Pickup 4WD
Jan 22, 2010 | 2000 Toyota Corolla
Sep 14, 2009 | 1995 Toyota Corolla
Apr 16, 2009 | 1999 Toyota Corolla
Jan 15, 2009 | 2003 Toyota Corolla
Nov 23, 2017 | Cars & Trucks
23 people viewed this question
Usually answered in minutes!