Question about 2008 Ford F-350

1 Answer

Have telescopic mirrors on f250 not enough ajustment to see on left hand side can mirror be be brought in in some way to be able to see or is there adjustment from left to right hand drive

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I THINK THAT THEY AJUST FROM INSIDE SO YOU WILL HAVE TO REMOVE DOOR CARD TO UNDO POWER CABLE REMOVE MIRROR AND CHANGE AJUSTMENT BENT CHROME LOOKING THING . YOU WILL NEED SOME STAR SCOKETS FOR THE WINDER HANDLE AND LIFT THE DOOR CARD IT SLIDES UPWOODS REMOVE SPEAKER YOU"LL FIND CABLE CONNECTOR THERE. GOOD LUCK

Posted on Aug 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford f250 super duty left side mirror installation


http://rogerweber.blogspot.com/2006/09/replacing-ford-f-250-super-duty-side.html try this website, hope it helps

Nov 19, 2011 | 2002 Ford F250 Super Duty SuperCab

1 Answer

How do i remove the wing mirror (power adjust & power fold) on the ford f250 super duty?


Roll the window down first, you will need 2 hands. Pull the small cover off that is at the top front of the door pannel. You will then disconnect the wire connector and remove the three 11mm nuts that are holding the mirror in place. Pull mirror out and replace.

If you dont have just that little pannel you will have to remove the door pannel. If you dont have power windows pull the cover out on the window crank and move it to the side, there will be a screw holding the crank in place. Remove it. If you do have power windows remove the window control switch plate (it will just pop up using a small screwdriver) and disconnect the wires. If equipped, remove the front door trim panel reflector or the courtesy lamp lens. Then remove the screws. DO NOT pull directly outward on the door pannel, something will brake. Remove the front door trim panel by pulling it straight upward.Lift and remove the front door trim panel. Then the nuts holding the mirror will be visible, remove and replace the mirror.

Dec 07, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Need to replace F250 passengers side mirror.


take the door panel off there is 2 to 3 bolts holding it on

Feb 15, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

How do you change out a left side mirror assembly on a 2005 town and country?


1. Pop off the triangular piece that is just cosmetic on the upper flat part of the mirror where it is attached to the van.
2. Under this piece are two visible bolts which you will need a Torx driver to remove.

3. Open the passenger door all the way open and remove the 3rd bolt, which is exposed from the outside of the car.
4. Expose the wiring harness plug by doing the following:
a. Pull off the door weatherstripping along the top of the door and on the pillar (the part of the car to the left of the windshield) Do not completely remove the weatherstip - simply pull it away enough to execute the next step.

b. Remove the plastic pillar cover: it simply snaps in. Pull hard and it will pop off
c. Lift up the plastic cover over the speaker on top of the dashboard. This piece goes all the way across the dashboard. Simply lift it up enough to get your hands underneath it. There is no need to free it from the passenger side.

d. Follow the mirror wiring harness around the rear of the speaker (the side nearest the engine) and unplug it from the female connector at the right-rear of the speaker. There may be a wire clip at the left-rear of the speaker that you will need to get the wire out of.
5. Unplug the wire, remove the mirror, replace the mirror, reinstall everything

hope its work

Jan 11, 2010 | 2005 Chrysler Town & Country

1 Answer

I need wiring diagram for a 1999 Ford f250 side view power mirror. I am installing 2003 telescoping side view mirrors and the color code in different.


make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!

Jul 23, 2009 | Ford F-250 Cars & Trucks

1 Answer

F150 and F250 Mirror Compatibility


First, after receiving an email from FixYa about my "Ford 1992 Ranger Problem" which was not my query at all, as the question was titled "F150 and F250 Mirror Compatibility" , I am asked for money for the answer. Then they ask me what the solution is, so they can sell it to some one else. Why would I pay someone when they can't even get the question right.
Incidentally, the solution was to ask someone competent.

Dec 20, 2008 | 1992 Ford Ranger

2 Answers

Mirrors will not fold in.


It is a stuck motor. Water gives rust inside housing. Remove mirror and clean motor and components. This is a well known error for H2 mirrors.

Dec 18, 2008 | 2006 Hummer H2

1 Answer

Driver and passenger mirrors on my 1996 Caprice Classic


THIS IS THE FIRST TIME I HEARD THIS. THE MRRORS MUST BE SHAKED A LOT BEFORE TO RELEASE THAT WAY. IF YOU NOTED IT YOU COULD FIX ON TIME

Aug 26, 2008 | 1996 Chevrolet Caprice Classic

1 Answer

Right Hand mirror doesn't retract


i would check the switch first and also the passenger side door jamb wire harness also i know it sounds simple but ALWAYS check ALL of you fuses before beginning any electrical fault tracing, try removing the switch and identify which wire powers the mirror and manually jump power with a paper clip to the mirror in question there should only be three wires one will have power and the others will be left and right mirror retraction if this works your switch is bad if not go to the mirror and power that manually and if no dice you got a bad motor -jeff

Jul 14, 2008 | 2001 Honda Civic

1 Answer

Telescoping mirrors


if you tilt the mirror glass and look inside you can see the release tabs, you will have to tilt it different way to get them all

Jul 01, 2008 | 2004 Ford F250

Not finding what you are looking for?
2008 Ford F-350 Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...