Question about Ford F

1 Answer

Ford fiesta cuts out!

Hi everyone! I am a silly young female who knows buggar all about cars. I have just had a t reg fiesta zetec, when i start it it is very idle and cuts out approx 2-3 times. I try keeping some revs on but it will still cut out! It does start going after a while and then i have no problems with it as the engine is warm. Does anyone know anything that can help me with how to sort the situation?

Posted by on

  • lamara_b Apr 24, 2009

    will do thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

If it was me i would put in some STP- gas treatment and this helps replace the fuel filter also make sure all of the vaccum lines are good and not off

Posted on Apr 24, 2009

  • edgar walker
    edgar walker Apr 24, 2009

    if it was me i would put in some STP- gas treatment and this helps replace the fuel filter also make sure all of the vaccum lines are good and not off

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 1.6 petrol ford fiesta, it started by failing start up when warmed up. Cuts out while driving


Ford Fiesta Start-Up Flaw (CPU-Based) - YouTube

? 1:54
www.youtube.com/watch?v=Y78GTNBytSQ
May 29, 2012 - Uploaded by georgef551 I found a start-up flaw in the Ford Fiesta, when I occasionally tried to start the car quickly, and... ... this happened. I had them either fail to fully turn over, or other CPU-based starters wouldstart up the vehicle. ..... Ford Fiesta 2004 Lx 1.4 petrol mk6 won't start help ! ... 2012 Ford Fiesta Zetec 1.6 TI-VCT. Start .

Jul 27, 2015 | Ford Cars & Trucks

1 Answer

How to change headlight bulb r reg fiesta


I find it much easier to remove the headlight to change all the front bulbs on my Fiesta Zetec 1.25 :)

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

Tyre pressure "fiesta zetec 1.25 16v V reg. year


Moulded into the sidewall of the tire.

Oct 27, 2011 | Cars & Trucks

1 Answer

Hi I have a ford fiesta zetec 1.2 y reg when I


Battery Cables may need to Cleaned and put back on There not making Contack,OK...

Aug 02, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Hi I have a ford fiesta zetec 1.2 y reg I go start it and nothing happens leave it for a min then it's starts but all the needles go crazy when it stArts can you tell me what you think it is


YOU have a Wire Some Where that is not making contack,Check your Battery Post and clean them Good,Check Battery to see if it is mounted right!!Pos to Pos,Neg to Neg..OK...

Aug 02, 2010 | Ford F Cars & Trucks

2 Answers

Hi ther i was wondering if any1 could help with a prob with a mk5 y reg fiesta zetec s it will start and then cut out


check the vacmun hoses and lines and make sure you dont ahve a vacumn leak also check / test the MAF

Jan 17, 2010 | 2001 Ford Focus

1 Answer

How to time up a ford fiesta 12.5 on a y reg for


(you need a set of timing tools to do this)you need to place timing pin in engine block located drivers side just above the sump you need to set pistons at tdc to do this turn crankshaft clockwise till the crank stops against the pin then you need to take off the rocker cover place cam setting bar in the end of camshfts you then need to loosen cam sprockets dont remove undo tensioner remove belt replace with new starting at crank anticlockwise tension up tighten cam sprockets remove bar and pins 2 rotations by hand to see if everything ok then start

Dec 13, 2009 | 2000 Ford Focus

1 Answer

Fiesta running lumpy


try running redex through the system then change the fuel filter to rule out a blocked line

May 19, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...