Question about 1990 Pontiac Grand Am

1 Answer

How to shift the transmission from park to neutral manually.

I have a 1990 grand am with the transmission in park the shift leaver will move but the transmission will not shift out of park.Can I manually from under the car shift the transmission in neutral so I can move the car?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

There is a shift linkage on the tranny ,look for the end of the cable on the tranny turn the linkage by hand , should be on top or right on front side.

Posted on Apr 24, 2009

  • DFARLEY Apr 24, 2009

    there is a shift linkage on the tranny ,look for the end of the cable on the tranny turn the linkage by hand , should be on top or right on front side.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs light on wont shift out of park


Hi Judy , what kind of vehicle do you have ? Year an model ? ABS light has nothing to do with it not coming out of park . Problem with automatic transmission shift lock control ! Probably !
The automatic transmission shift lock control is a safety device that prevents an inadvertent shift out of PARK when the ignition is ON. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
?€¢
The automatic transmission shift lock control solenoid.


?€¢
The automatic transmission shift lock control switch.


?€¢
The park/neutral safety switch.

With the ignition in the ON position, battery positive voltage is supplied to the automatic transmission shift lock control switch. The circuit continues through the normally-closed switch to the automatic transmission shift lock control solenoid. The park/neutral safety switch provides a path to ground for the automatic transmission shift lock control solenoid in the PARK position. This energizes the automatic transmission shift lock control solenoid, mechanically locking the shift linkage in the PARK position. When the driver presses the brake pedal the contacts in the automatic transmission shift lock control switch open, causing the automatic transmission shift lock control solenoid to de-energize. This allows the shift lever to move from the PARK position. When the shift lever is out of the PARK position the contacts in the neutral safety switch open and the automatic transmission shift lock control solenoid is de-energized.

Jul 07, 2015 | Cars & Trucks

2 Answers

How do i adjust shifter cable so transmission goes into Park?


Hi,you need to jack car off the ground,and put selector in refirst and aply hand brake,undo the gear leaver from the gearbox then manualy put the gear selector in park position then ajust selector linkidge so that it will go back on without pulling the gear selector out fom its position,if it dose not pick up park now there must be something wrong with the gearbox.
hope this was some help.

May 01, 2015 | 1996 Jeep Grand Cherokee

1 Answer

My 2001 Jeep Grand Cherokee wont start sometimes, but if I put it in neutral then try to start it..It starts .. What is the problem with my baby.......


Test/Service/Replace

The circuit on newer cars with automatic transmissions has a neutral safety, or neutral start switch installed between the ignition switch and the starter. The ignition switch cannot operate the starter motor unless the transmission is in park or neutral.
Late model vehicles with manual transmissions have a starter/clutch interlock switch that requires the clutch to be depressed to the floor.
Neutral Safety Switch
Normal operations of a neutral safety switch provides a quick check for the adjustment of the gear selector linkage.
  • To do this, move the selector slowly until it clicks into the PARK position.
  • Turn the ignition key to the START position.
  • If the starter operates, the PARK position is correct.
  • After checking the PARK position, move the lever slowly toward the NEUTRAL position until the lever drops at the end of the NEUTRAL stop in the selector gate.
  • If the starter also operates at this point, the gearshift linkage is properly adjusted.
  • This quick test also tests the adjustment of the neutral safety switch.
  • If the engine does not start in either or both of these positions, the neutral safety switch or the gear selector linkage needs adjustment or repair.

CAUTION
Since you must work under the vehicle to adjust most shift linkages make sure you properly raise and support the vehicle before working under it. Also, wear safety glasses or goggles while working under the vehicle.
A voltmeter can be used to check the switch for voltage when the ignition key is turned to the START position with the shift lever in PARK or NEUTRAL. If there is no voltage, the switch should be adjusted or replaced.

Jan 26, 2013 | 2002 Jeep Grand Cherokee

3 Answers

I CAN NOT SHIFT THR TRANS INTO NUTRAL SO I CAN TOW IT BEHIND MY MOTOR HOME. IT WILL SHIFT INTO 2H, 4H, 4L


Shifting to NEUTRAL
To shift the transfer case to NEUTRAL, first make sure
the vehicle is parked so that it will not roll:
1. Set the parking brake.
2. Start the vehicle.
3. Connect the vehicle to the towing vehicle.
4. Put the transmission in NEUTRAL (N) or have
the clutch pedal pressed for vehicles with
manual transmission.
5. Shift the transfer case to 2HI.
6. Simultaneously press and hold the 2HI and
4LO buttons for 10 seconds. The red NEUTRAL
light will come on when the transfer case shift to
NEUTRAL is complete.
7. Shift the transmission to REVERSE (R) for one
second, then shift the transmission to DRIVE (D)
for one second or FIRST (1) for vehicles with
manual transmission.
8. Turn the ignition to OFF.
9. Place the transmission shift lever in PARK (P) or
FIRST (1) for vehicles with manual transmission.
10. Release the parking brake prior to towing.

************************

Shifting Out of NEUTRAL
To shift out of NEUTRAL:
1. Set the parking brake and apply the regular
brake pedal.
2. Start the vehicle with the transmission in PARK (P)
or FIRST (1) for vehicles with manual transmission.
3. Press the button for the desired transfer case position
(2HI, 4HI, AUTO 4WD or 4LO).
4. Put the transmission in NEUTRAL (N) or press the
clutch pedal for vehicles with manual transmission.
5. Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light will go out.
6. A re-engagement sound is normal when shifting out
of NEUTRAL.

Jan 22, 2010 | 2000 GMC Jimmy

1 Answer

Automatic gearbox 1990jetta2 car rides when gearlever is place in drive but when placed in reverce car donot want to move.


You need to get a Haynes manual or similar.
There are two cables which run from the shift lever to the transmission to select the PRND21.
If these cables are not adjusted precisely, you will lose a function. After the reverse gear stops working the out of adjustment won't allow the car to go into park. The park position becomes reverse.
The Haynes manual describes step by step how to do it. Cheap book (about $15).
Try other positions like neutral or part way through neutral and park and you may find your gear there. If you do, you are lucky; adjustment only.
If the cable is not the problem....you may need a transmission.

Aug 17, 2009 | 1990 Yugo GV

1 Answer

Shifting manually


yea that should work just fine just put the key in and shift into neutral to move it but be careful if its on a hill it will start rolling

Jun 07, 2009 | 1990 Pontiac Grand Am

1 Answer

1990 Suzuki Escudo 4 wheel drive


As far as I know the procedure should go something like this...

Stop the vehicle, engage the parking brake and if applicable, get out and turn the hubs on the front wheels from Free, to Lock.(You may not have these on a Suzuki, they may be auto-lockers)

Get back in the vehicle and put the transmission shift selector into Neutral.

If you have a manual transfer case, move the selector-shaft to 4x4-High, or 4x4-Low -- whichever is desired. Now, putting the vehicle in gear with the transfer case is sometimes somewhat difficult. As long as the vehicle's transmission is in neutral, don't worry, the gears inside the transfer case are big and beefy -- Don't be afraid to be rough -- Again as long as the transmission is in neutral. You may also have to disengage the parking brake and slightly let the vehicle roll forward or back with your foot-brake to get the Transfer case to lock into place.

Once 4x4 of the selected High, Or Low range is selected, usually indicated by the vehicle jerking slightly with a slightly loud clank/thud. Move the Transmission selector out of neutral into your desired gear (Drive if Automatic, if Manual, whichever gear you pull out from). and voila! You should now be in 4-Wheel-Drive.

To disengage 4-Wheel-Drive. Just reverse the steps.

May 16, 2008 | 1990 Suzuki Sidekick

Not finding what you are looking for?
1990 Pontiac Grand Am Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...