Question about 1994 Toyota Land Cruiser
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, make sure your parking brake is off.
Remove the rear caliper and then the brake pad housing. In the center hub of the rotor the parking brake shoes are located. The may need to be loosen first. There is a hole between 2 of the studs you need to align at the bottom. Look in the hole with a flashlight and find the star wheel. Use a screw driver to turn the wheel up a few turns to loosen the parking brake shoes from the rotor hub.
After that there are 2 threaded holes in the rotor near the studs you put two 8mm bolts in and slowly tighten each and it will pull the rotor off the hub. They rust up pretty bad so use penetrating oil on them.
Posted on Apr 11, 2009
1°00’ ± 45'
3°00’ ± 1°
Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.
(0.08 ± 0.08 in.
This is the only Land Cruiser Specs I could find, hope it helps
Posted on Apr 18, 2009
Tips for a great answer:
Mar 08, 2015 | 1994 Toyota Land Cruiser
Nov 09, 2014 | 1994 Toyota Land Cruiser
Dec 29, 2013 | 1994 Toyota Land Cruiser
Dec 26, 2012 | 1994 Toyota Land Cruiser
Mar 11, 2012 | 1994 Toyota Land Cruiser
Feb 28, 2012 | 1994 Toyota Land Cruiser
Feb 07, 2012 | 1994 Toyota Land Cruiser
May 03, 2011 | 1994 Toyota Land Cruiser
Mar 05, 2011 | 1994 Toyota Land Cruiser
Apr 29, 2010 | 1994 Toyota Land Cruiser
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: